sparx5/lan969x/lan969x_rgmii.c

1 // SPDX-License-Identifier: GPL-2.0+
27 #define LAN969X_RGMII_PORT_START_IDX 28 /* Index of the first RGMII port */
32 #define RGMII_PORT_IDX(port) ((port)->portno - LAN969X_RGMII_PORT_START_IDX)
78 		dev_err(port->sparx5->dev, "Invalid RGMII delay: %u", delay_ps);  in lan969x_rgmii_get_clk_delay_sel()
79 		return -EINVAL;  in lan969x_rgmii_get_clk_delay_sel()
85 /* Configure the RGMII tx clock frequency. */
89 	u32 clk_sel = lan969x_rgmii_get_clk_sel(conf->speed);  in lan969x_rgmii_tx_clk_config()
92 	/* Take the RGMII clock domain out of reset and set tx clock  in lan969x_rgmii_tx_clk_config()
101 		 port->sparx5, HSIO_WRAP_RGMII_CFG(idx));  in lan969x_rgmii_tx_clk_config()
104 /* Configure the RGMII port device. */
110 	speed_sel = lan969x_rgmii_get_speed_sel(conf->speed);  in lan969x_rgmii_port_device_config()
112 	etype = (port->vlan_type == SPX5_VLAN_PORT_TYPE_S_CUSTOM ?  in lan969x_rgmii_port_device_config()
113 		 port->custom_etype :  in lan969x_rgmii_port_device_config()
114 		 port->vlan_type == SPX5_VLAN_PORT_TYPE_C ?  in lan969x_rgmii_port_device_config()
117 	dtag = port->max_vlan_tags == SPX5_PORT_MAX_TAGS_TWO;  in lan969x_rgmii_port_device_config()
118 	dotag = port->max_vlan_tags != SPX5_PORT_MAX_TAGS_NONE;  in lan969x_rgmii_port_device_config()
123 		port->sparx5, DEVRGMII_MAC_ENA_CFG(idx));  in lan969x_rgmii_port_device_config()
129 		port->sparx5, DEVRGMII_MAC_IFG_CFG(idx));  in lan969x_rgmii_port_device_config()
133 		port->sparx5, DEVRGMII_DEV_RST_CTRL(idx));  in lan969x_rgmii_port_device_config()
140 		port->sparx5,  in lan969x_rgmii_port_device_config()
144 /* Configure the RGMII delay lines in the MAC.
146  * We use the rx-internal-delay-ps" and "tx-internal-delay-ps" properties to
151  * (e.g. PHY_INTERFACE_MODE_RGMII_{ID, RXID, TXID}), and ignored by the MAC side
161 	of_property_read_u32(port->of_node, "rx-internal-delay-ps",  in lan969x_rgmii_delay_config()
164 	of_property_read_u32(port->of_node, "tx-internal-delay-ps",  in lan969x_rgmii_delay_config()
184 		 port->sparx5, HSIO_WRAP_DLL_CFG(idx, 0));  in lan969x_rgmii_delay_config()
195 		 port->sparx5, HSIO_WRAP_DLL_CFG(idx, 1));  in lan969x_rgmii_delay_config()
200 /* Configure GPIO's to be used as RGMII interface. */
205 	/* Enable the RGMII on the GPIOs. */  in lan969x_rgmii_gpio_config()
206 	spx5_wr(HSIO_WRAP_XMII_CFG_GPIO_XMII_CFG_SET(1), port->sparx5,  in lan969x_rgmii_gpio_config()