120  * Starting with Haswell, DDI port buffers must be programmed with correct
151  * Starting with Haswell, DDI port buffers must be programmed with correct
209 		drm_err(display->drm, "Timeout waiting for DDI BUF %c to get idle\n",  in intel_wait_ddi_buf_idle()
234 		drm_err(display->drm, "Timeout waiting for DDI BUF %c to get active\n",  in intel_wait_ddi_buf_active()
650  * bit for the DDI function and enables the DP2 configuration. Called for all
671  * Disable the DDI function and port syncing.
672  * For SST, pre-TGL MST, TGL+ MST-slave transcoders: deselect the DDI port,
717 		drm_dbg_kms(display->drm, "Quirk Increase DDI disabled time\n");  in intel_ddi_disable_transcoder_func()
1151  * used on all DDI platforms. Should that change we need to
2128 		 * For DSI we keep the ddi clocks gated  in intel_ddi_sanitize_encoder_pll_mapping()
2139 		    "[ENCODER:%d:%s] is disabled/in DSI mode with an ungated DDI clock, gate it\n",  in intel_ddi_sanitize_encoder_pll_mapping()
2572 		drm_err(&dev_priv->drm, "Timeout waiting for D2D Link enable for DDI/PORT_BUF_CTL %c\n",  in mtl_ddi_enable_d2d()
2658 	 * 6.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST  in mtl_ddi_pre_enable_dp()
2681 	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit  in mtl_ddi_pre_enable_dp()
2806 	 * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST  in tgl_ddi_pre_enable_dp()
2824 	 * the used lanes of the DDI.  in tgl_ddi_pre_enable_dp()
2842 	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit  in tgl_ddi_pre_enable_dp()
3073 		drm_err(&dev_priv->drm, "Timeout waiting for D2D Link disable for DDI/PORT_BUF_CTL %c\n",  in mtl_ddi_disable_d2d()
3430 		 * the bits affect a specific DDI port rather than  in intel_ddi_enable_hdmi()
4840 		 * don't fail the entire DDI init.  in intel_ddi_init_hdmi_connector()
5034 		return true; /* no strap for DDI-E */  in port_strap_detected()
5161 				 "DDI %c/PHY %c",  in intel_ddi_init()
5169 				 "DDI %s%c/PHY %s%c",  in intel_ddi_init()
5179 				 "DDI %c%s/PHY %s%c",  in intel_ddi_init()
5187 				 "DDI %c/PHY %c", port_name(port), phy_name(phy));  in intel_ddi_init()