dts/fsl/t104xd4rdb.dtsi

14  *	 names of its contributors may be used to endorse or promote products
36 	reserved-memory {
37 		#address-cells = <2>;
38 		#size-cells = <2>;
41 		bman_fbpr: bman-fbpr {
45 		qman_fqd: qman-fqd {
49 		qman_pfdr: qman-pfdr {
56 		reg = <0xf 0xfe124000 0 0x2000>;
62 			#address-cells = <1>;
63 			#size-cells = <1>;
64 			compatible = "cfi-flash";
65 			reg = <0x0 0x0 0x8000000>;
66 			bank-width = <2>;
67 			device-width = <1>;
71 			#address-cells = <1>;
72 			#size-cells = <1>;
73 			compatible = "fsl,ifc-nand";
74 			reg = <0x2 0x0 0x10000>;
78 			compatible = "fsl,t1040d4rdb-cpld";
79 			reg = <3 0 0x300>;
91 	bportals: bman-portals@ff4000000 {
95 	qportals: qman-portals@ff6000000 {
101 		reg = <0xf 0xfe000000 0 0x00001000>;
105 				#address-cells = <1>;
106 				#size-cells = <1>;
107 				compatible = "micron,n25q512ax3", "jedec,spi-nor";
108 				reg = <0>;
110 				spi-max-frequency = <10000000>;
114 				reg = <1>;
115 				spi-max-frequency = <2000000>; /* input clock */
119 				reg = <2>;
120 				spi-max-frequency = <2000000>; /* input clock */
126 				reg = <0x4c>;
131 				reg = <0x68>;
148 				reg = <0x77>;
149 				#address-cells = <1>;
150 				#size-cells = <0>;
157 		reg = <0xf 0xfe240000 0 0x10000>;
172 		reg = <0xf 0xfe250000 0 0x10000>;
187 		reg = <0xf 0xfe260000 0 0x10000>;
202 		reg = <0xf 0xfe270000 0 0x10000>;
218 		reg = <0xf 0xfe140000 0 0x480>;
219 		brg-frequency = <0>;
220 		bus-frequency = <0>;
223 			compatible = "fsl,t1040-qe-si";
224 			reg = <0x700 0x80>;
228 			compatible = "fsl,t1040-qe-siram";
229 			reg = <0x1000 0x800>;
233 			compatible = "fsl,ucc-hdlc";
234 			rx-clock-name = "clk8";
235 			tx-clock-name = "clk9";
236 			fsl,rx-sync-clock = "rsync_pin";
237 			fsl,tx-sync-clock = "tsync_pin";
238 			fsl,tx-timeslot-mask = <0xfffffffe>;
239 			fsl,rx-timeslot-mask = <0xfffffffe>;
240 			fsl,tdm-framer-type = "e1";
241 			fsl,tdm-id = <0>;
242 			fsl,siram-entry-id = <0>;
243 			fsl,tdm-interface;
247 			compatible = "fsl,t1040-ucc-uart";
248 			port-number = <0>;
249 			rx-clock-name = "brg2";
250 			tx-clock-name = "brg2";