dts/fsl/t1023rdb.dts

14  *	 names of its contributors may be used to endorse or promote products
35 /include/ "t102xsi-pre.dtsi"
40 	#address-cells = <2>;
41 	#size-cells = <2>;
42 	interrupt-parent = <&mpic>;
44 	reserved-memory {
45 		#address-cells = <2>;
46 		#size-cells = <2>;
49 		bman_fbpr: bman-fbpr {
54 		qman_fqd: qman-fqd {
59 		qman_pfdr: qman-pfdr {
66 		reg = <0xf 0xfe124000 0 0x2000>;
71 			#address-cells = <1>;
72 			#size-cells = <1>;
74 			compatible = "cfi-flash";
75 			reg = <0x0 0x0 0x8000000>;
76 			bank-width = <2>;
77 			device-width = <1>;
81 			#address-cells = <1>;
82 			#size-cells = <1>;
83 			compatible = "fsl,ifc-nand";
84 			reg = <0x1 0x0 0x10000>;
96 	bportals: bman-portals@ff4000000 {
100 	qportals: qman-portals@ff6000000 {
106 		reg = <0xf 0xfe000000 0 0x00001000>;
109 				#address-cells = <1>;
110 				#size-cells = <1>;
111 				compatible = "spansion,s25fl512s", "jedec,spi-nor";
112 				reg = <0>;
113 				spi-max-frequency = <10000000>; /* input clk */
120 				reg = <0x50>;
125 				reg = <0x68>;
131 			current-sensor@40 {
133 				reg = <0x40>;
134 				shunt-resistor = <1000>;
137 			current-sensor@41 {
139 				reg = <0x41>;
140 				shunt-resistor = <1000>;
146 				phy-handle = <&sgmii_rtk_phy2>;
147 				phy-connection-type = "sgmii";
156 				phy-handle = <&sgmii_aqr_phy3>;
157 				phy-connection-type = "2500base-x";
162 				phy-handle = <&rgmii_rtk_phy1>;
163 				phy-connection-type = "rgmii";
169 				rgmii_rtk_phy1: ethernet-phy@1 {
170 					reg = <0x1>;
172 				sgmii_rtk_phy2: ethernet-phy@3 {
173 					reg = <0x3>;
178 				sgmii_aqr_phy3: ethernet-phy@2 {
179 					compatible = "ethernet-phy-ieee802.3-c45";
180 					reg = <0x2>;
187 		reg = <0xf 0xfe240000 0 0x10000>;
202 		reg = <0xf 0xfe250000 0 0x10000>;
217 		reg = <0xf 0xfe260000 0 0x10000>;
232 #include "t1023si-post.dtsi"