m68k/atari/debug.c

6  * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
23 /* Can be set somewhere, if a SCC master reset has already be done and should
31 	.index	= -1,
45 	while (count--) {  in atari_mfp_console_write()
64 	while (count--) {  in atari_scc_console_write()
81 	while (count--) {  in atari_midi_console_write()
91 	/* This a some-seconds timeout in case no printer is connected */  in ata_par_out()
94 	while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */  in ata_par_out()
117 	while (count--) {  in atari_par_console_write()
164 	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150  in atari_init_mfp_port()
165 	 * bps, resp., and work only correct if there's a RSVE or RSSPEED  in atari_init_mfp_port()
175 		baud = B9600;		/* use default 9600bps for non-implemented rates */  in atari_init_mfp_port()
176 	baud -= B1200;			/* baud_table[] starts at 1200bps */  in atari_init_mfp_port()
199 		for (i = 100; i > 0; --i)		\
224 		baud = B9600;		/* use default 9600bps for non-implemented rates */  in atari_init_scc_port()
225 	baud -= B1200;			/* tables starts at 1200bps */  in atari_init_scc_port()
234 			  baud == 7 ? 0x80 : /* really 76800bps */  in atari_init_scc_port()
235 				      0x40;  /* really 153600bps */  in atari_init_scc_port()
242 	(void)atari_scc.cha_b_ctrl;	/* reset reg pointer */  in atari_init_scc_port()
243 	SCC_WRITE(9, 0xc0);		/* reset */  in atari_init_scc_port()
276 		div = ACIA_DIV64;	/* really 7812.5 bps */  in atari_init_midi_port()
280 		div = ACIA_DIV16;	/* 31250 bps, standard for MIDI */  in atari_init_midi_port()
301 		/* ST-MFP Modem1 serial port */  in atari_debug_setup()