Lines Matching +full:regulator +full:- +full:fixed +full:- +full:clock
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/leds/common.h>
15 compatible = "renesas,spider-cpu", "renesas,r8a779f0";
30 stdout-path = "serial0:1843200n8";
34 compatible = "gpio-leds";
36 led-7 {
40 function-enumerator = <7>;
43 led-8 {
47 function-enumerator = <8>;
62 rc21012_pci: clk-rc21012-pci {
63 compatible = "fixed-clock";
64 clock-frequency = <100000000>;
65 #clock-cells = <0>;
68 rc21012_ufs: clk-rc21012-ufs {
69 compatible = "fixed-clock";
70 clock-frequency = <38400000>;
71 #clock-cells = <0>;
74 reg_1p8v: regulator-1p8v {
75 compatible = "regulator-fixed";
76 regulator-name = "fixed-1.8V";
77 regulator-min-microvolt = <1800000>;
78 regulator-max-microvolt = <1800000>;
79 regulator-boot-on;
80 regulator-always-on;
83 reg_3p3v: regulator-3p3v {
84 compatible = "regulator-fixed";
85 regulator-name = "fixed-3.3V";
86 regulator-min-microvolt = <3300000>;
87 regulator-max-microvolt = <3300000>;
88 regulator-boot-on;
89 regulator-always-on;
94 clock-frequency = <20000000>;
98 clock-frequency = <32768>;
102 pinctrl-0 = <&hscif0_pins>;
103 pinctrl-names = "default";
104 bootph-all;
106 uart-has-rtscts;
111 pinctrl-0 = <&i2c0_pins>;
112 pinctrl-names = "default";
115 clock-frequency = <400000>;
120 gpio-controller;
121 #gpio-cells = <2>;
123 rc21012-gpio2-hog {
124 gpio-hog;
126 output-high;
132 pinctrl-0 = <&i2c4_pins>;
133 pinctrl-names = "default";
136 clock-frequency = <400000>;
140 label = "cpu-board";
151 pinctrl-0 = <&mmc_pins>;
152 pinctrl-1 = <&mmc_pins>;
153 pinctrl-names = "default", "state_uhs";
155 vmmc-supply = <®_3p3v>;
156 vqmmc-supply = <®_1p8v>;
157 mmc-hs200-1_8v;
158 mmc-hs400-1_8v;
159 bus-width = <8>;
160 no-sd;
161 no-sdio;
162 non-removable;
163 full-pwr-cycle-in-suspend;
168 compatible = "gpio-gate-clock";
170 enable-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
171 /delete-property/ clock-frequency;
175 reset-gpios = <&gpio_exp_20 0 GPIO_ACTIVE_LOW>;
180 pinctrl-0 = <&scif_clk_pins>;
181 pinctrl-names = "default";
201 power-source = <1800>;
216 timeout-sec = <60>;
221 pinctrl-0 = <&scif0_pins>;
222 pinctrl-names = "default";
224 uart-has-rtscts;
229 clock-frequency = <24000000>;
237 compatible = "gpio-gate-clock";
239 enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>;
240 /delete-property/ clock-frequency;