dts/amlogic/meson-g12b-w400.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b.dtsi"
11 #include "meson-g12b-s922x.dtsi"
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/gpio/meson-g12a-gpio.h>
22 		stdout-path = "serial0:115200n8";
30 	emmc_pwrseq: emmc-pwrseq {
31 		compatible = "mmc-pwrseq-emmc";
32 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
35 	sdio_pwrseq: sdio-pwrseq {
36 		compatible = "mmc-pwrseq-simple";
37 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
39 		clock-names = "ext_clock";
42 	flash_1v8: regulator-flash-1v8 {
43 		compatible = "regulator-fixed";
44 		regulator-name = "FLASH_1V8";
45 		regulator-min-microvolt = <1800000>;
46 		regulator-max-microvolt = <1800000>;
47 		vin-supply = <&vcc_3v3>;
48 		regulator-always-on;
51 	main_12v: regulator-main-12v {
52 		compatible = "regulator-fixed";
53 		regulator-name = "12V";
54 		regulator-min-microvolt = <12000000>;
55 		regulator-max-microvolt = <12000000>;
56 		regulator-always-on;
59 	vcc_5v: regulator-vcc-5v {
60 		compatible = "regulator-fixed";
61 		regulator-name = "VCC_5V";
62 		regulator-min-microvolt = <5000000>;
63 		regulator-max-microvolt = <5000000>;
64 		vin-supply = <&main_12v>;
67 		enable-active-high;
70 	vcc_1v8: regulator-vcc-1v8 {
71 		compatible = "regulator-fixed";
72 		regulator-name = "VCC_1V8";
73 		regulator-min-microvolt = <1800000>;
74 		regulator-max-microvolt = <1800000>;
75 		vin-supply = <&vcc_3v3>;
76 		regulator-always-on;
79 	vcc_3v3: regulator-vcc-3v3 {
80 		compatible = "regulator-fixed";
81 		regulator-name = "VCC_3V3";
82 		regulator-min-microvolt = <3300000>;
83 		regulator-max-microvolt = <3300000>;
84 		vin-supply = <&vddao_3v3>;
85 		regulator-always-on;
89 	vddcpu_a: regulator-vddcpu-a {
91 		 * MP1653 Regulator.
93 		compatible = "pwm-regulator";
95 		regulator-name = "VDDCPU_A";
96 		regulator-min-microvolt = <721000>;
97 		regulator-max-microvolt = <1022000>;
99 		pwm-supply = <&main_12v>;
102 		pwm-dutycycle-range = <100 0>;
104 		regulator-boot-on;
105 		regulator-always-on;
108 	vddcpu_b: regulator-vddcpu-b {
110 		 * MP1652 Regulator.
112 		compatible = "pwm-regulator";
114 		regulator-name = "VDDCPU_B";
115 		regulator-min-microvolt = <721000>;
116 		regulator-max-microvolt = <1022000>;
118 		pwm-supply = <&main_12v>;
121 		pwm-dutycycle-range = <100 0>;
123 		regulator-boot-on;
124 		regulator-always-on;
127 	usb1_pow: regulator-usb1-pow {
128 		compatible = "regulator-fixed";
129 		regulator-name = "USB1_POW";
130 		regulator-min-microvolt = <5000000>;
131 		regulator-max-microvolt = <5000000>;
132 		vin-supply = <&vcc_5v>;
136 		enable-active-high;
139 	usb_pwr_en: regulator-usb-pwr-en {
140 		compatible = "regulator-fixed";
141 		regulator-name = "USB_PWR_EN";
142 		regulator-min-microvolt = <5000000>;
143 		regulator-max-microvolt = <5000000>;
144 		vin-supply = <&vcc_5v>;
146 		/* Connected to USB3 Type-A Port power enable */
148 		enable-active-high;
151 	vddao_1v8: regulator-vddao-1v8 {
152 		compatible = "regulator-fixed";
153 		regulator-name = "VDDAO_1V8";
154 		regulator-min-microvolt = <1800000>;
155 		regulator-max-microvolt = <1800000>;
156 		vin-supply = <&vddao_3v3>;
157 		regulator-always-on;
160 	vddao_3v3: regulator-vddao-3v3 {
161 		compatible = "regulator-fixed";
162 		regulator-name = "VDDAO_3V3";
163 		regulator-min-microvolt = <3300000>;
164 		regulator-max-microvolt = <3300000>;
165 		vin-supply = <&main_12v>;
166 		regulator-always-on;
169 	cvbs-connector {
170 		compatible = "composite-video-connector";
174 				remote-endpoint = <&cvbs_vdac_out>;
179 	hdmi-connector {
180 		compatible = "hdmi-connector";
185 				remote-endpoint = <&hdmi_tx_tmds_out>;
191 		compatible = "pwm-clock";
192 		#clock-cells = <0>;
193 		clock-frequency = <32768>;
199 	pinctrl-0 = <&cec_ao_a_h_pins>;
200 	pinctrl-names = "default";
202 	hdmi-phandle = <&hdmi_tx>;
206 	pinctrl-0 = <&cec_ao_b_h_pins>;
207 	pinctrl-names = "default";
209 	hdmi-phandle = <&hdmi_tx>;
213 	cpu-supply = <&vddcpu_b>;
214 	operating-points-v2 = <&cpu_opp_table_0>;
216 	clock-latency = <50000>;
220 	cpu-supply = <&vddcpu_b>;
221 	operating-points-v2 = <&cpu_opp_table_0>;
223 	clock-latency = <50000>;
227 	cpu-supply = <&vddcpu_a>;
228 	operating-points-v2 = <&cpub_opp_table_1>;
230 	clock-latency = <50000>;
234 	cpu-supply = <&vddcpu_a>;
235 	operating-points-v2 = <&cpub_opp_table_1>;
237 	clock-latency = <50000>;
241 	cpu-supply = <&vddcpu_a>;
242 	operating-points-v2 = <&cpub_opp_table_1>;
244 	clock-latency = <50000>;
248 	cpu-supply = <&vddcpu_a>;
249 	operating-points-v2 = <&cpub_opp_table_1>;
251 	clock-latency = <50000>;
256 		remote-endpoint = <&cvbs_connector_in>;
261 	external_phy: ethernet-phy@0 {
264 		max-speed = <1000>;
266 		reset-assert-us = <10000>;
267 		reset-deassert-us = <80000>;
268 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
270 		interrupt-parent = <&gpio_intc>;
277 	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
278 	pinctrl-names = "default";
280 	phy-mode = "rgmii";
281 	phy-handle = <&external_phy>;
282 	amlogic,tx-delay-ns = <2>;
287 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
288 	pinctrl-names = "default";
289 	hdmi-supply = <&vcc_5v>;
294 		remote-endpoint = <&hdmi_connector_in>;
300 	pinctrl-0 = <&remote_input_ao_pins>;
301 	pinctrl-names = "default";
305 	pinctrl-0 = <&pwm_a_e_pins>;
306 	pinctrl-names = "default";
311 	pinctrl-0 = <&pwm_ao_d_e_pins>;
312 	pinctrl-names = "default";
317 	pinctrl-0 = <&pwm_e_pins>;
318 	pinctrl-names = "default";
325 	pinctrl-0 = <&sdio_pins>;
326 	pinctrl-1 = <&sdio_clk_gate_pins>;
327 	pinctrl-names = "default", "clk-gate";
328 	#address-cells = <1>;
329 	#size-cells = <0>;
331 	bus-width = <4>;
332 	cap-sd-highspeed;
333 	max-frequency = <100000000>;
336 	keep-power-in-suspend;
338 	non-removable;
339 	disable-wp;
341 	mmc-pwrseq = <&sdio_pwrseq>;
343 	vmmc-supply = <&vddao_3v3>;
344 	vqmmc-supply = <&vddao_1v8>;
348 		compatible = "brcm,bcm4329-fmac";
355 	pinctrl-0 = <&sdcard_c_pins>;
356 	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
357 	pinctrl-names = "default", "clk-gate";
359 	bus-width = <4>;
360 	cap-sd-highspeed;
361 	max-frequency = <50000000>;
362 	disable-wp;
364 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
365 	vmmc-supply = <&vddao_3v3>;
366 	vqmmc-supply = <&vddao_3v3>;
372 	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
373 	pinctrl-1 = <&emmc_clk_gate_pins>;
374 	pinctrl-names = "default", "clk-gate";
376 	bus-width = <8>;
377 	cap-mmc-highspeed;
378 	max-frequency = <100000000>;
379 	disable-wp;
381 	mmc-pwrseq = <&emmc_pwrseq>;
382 	vmmc-supply = <&vcc_3v3>;
383 	vqmmc-supply = <&flash_1v8>;
388 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
389 	pinctrl-names = "default";
390 	uart-has-rtscts;
393 		compatible = "brcm,bcm43438-bt";
394 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
395 		max-speed = <2000000>;
397 		clock-names = "lpo";
403 	pinctrl-0 = <&uart_ao_a_pins>;
404 	pinctrl-names = "default";
410 	vbus-supply = <&usb_pwr_en>;
414 	phy-supply = <&usb1_pow>;
418 	phy-supply = <&usb1_pow>;