dts/microchip/at91-sama7d65_curiosity.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  *  at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
10 /dts-v1/;
11 #include "sama7d65-pinfunc.h"
13 #include <dt-bindings/mfd/atmel-flexcom.h>
14 #include <dt-bindings/pinctrl/at91.h>
18 	compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
26 		stdout-path = "serial0:115200n8";
48 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
53 	pinctrl-names = "default";
54 	pinctrl-0 = <&pinctrl_uart6_default>;
59 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
65 	i2c-analog-filter;
66 	i2c-digital-filter;
67 	i2c-digital-filter-width-ns = <35>;
68 	pinctrl-names = "default";
69 	pinctrl-0 = <&pinctrl_i2c10_default>;
72 	power-monitor@10 {
75 		#address-cells = <1>;
76 		#size-cells = <0>;
80 			shunt-resistor-micro-ohms = <47000>;
86 			shunt-resistor-micro-ohms = <47000>;
92 			shunt-resistor-micro-ohms = <47000>;
98 			shunt-resistor-micro-ohms = <47000>;
105 	clock-frequency = <24000000>;
109 	pinctrl_i2c10_default: i2c10-default{
112 		bias-pull-up;
115 	pinctrl_sdmmc1_default: sdmmc1-default {
116 		cmd-data {
122 			slew-rate = <0>;
123 			bias-disable;
126 		ck-cd-rstn-vddsel {
132 			slew-rate = <0>;
133 			bias-disable;
137 	pinctrl_uart6_default: uart6-default {
140 		bias-disable;
145 	bus-width = <4>;
146 	pinctrl-names = "default";
147 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
152 	debounce-delay-us = <976>;
161 	clock-frequency = <32768>;