ethernet/intel/igb.rst

1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999-2018 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Additional Configurations
16 - Support
46 -------
47 :Valid Range: 0-7
49 This parameter adds support for SR-IOV. It causes the driver to spawn up to
76 NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
85 -----
86 :Valid Range: 0-16 (0=none,...,16=all)
96 ------------
113 - For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
114 - For SLES: /etc/sysconfig/network/<config_file>
124 -------
132 Enabling Wake on LAN (WoL)
133 --------------------------
134 WoL is configured through the ethtool utility.
136 WoL will be enabled on the system during the next shut down or reboot. For
137 this driver version, in order to enable WoL, the igb driver must be loaded
140 NOTE: Wake on LAN is only supported on port A of multi-port devices.  Also
142 - Intel(R) Gigabit VT Quad Port Server Adapter
146 ----------
147 In this mode, a separate MSI-X vector is allocated for each queue and one for
154 REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found,
156 receive multiqueue on all kernels that support MSI-X.
159 and multiqueue mode or vice-versa.
162 MAC and VLAN anti-spoofing feature
163 ----------------------------------
174 Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
175 ------------------------------------------------------------
176 You can set a MAC address of a Virtual Function (VF), a default VLAN and the
182 ------------------------------
184 the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the
208 to intel-wired-lan@lists.osuosl.org.