Documentation/networking/bonding.rst

83    11. Configuring Bonding for High Availability
84    11.1	High Availability in a Single Switch Topology
85    11.2	High Availability in a Multiple Switch Topology
246 	occurs.  This keeps the aggregator with the highest availability
400 	packets for link availability purposes.  Arriving packets that are
406 	determining if a slave has received traffic for link availability
413 	link availability purposes.
580 	determined.  See the High Availability section for additional
2004 be useful in a High Availability setup to have several targets to
2234 11. Configuring Bonding for High Availability
2237 High Availability refers to configurations that provide
2238 maximum network availability by having redundant or backup devices,
2240 goal is to provide the maximum availability of network connectivity
2244 11.1 High Availability in a Single Switch Topology
2248 connected via multiple physical links, then there is no availability
2258 11.2 High Availability in a Multiple Switch Topology
2263 a trade off between network availability and usable bandwidth.
2266 availability of the network::
2290 availability; the other modes require all links to terminate on the
2335 miimon.  Availability and configuration for trunk failover varies by
2464 	same level of network availability, but with increased
2608 availability.  The ARP monitor will function in this topology, but its
2755 much like the example in "High Availability in a Multiple Switch
2843 Availability and the documentation for each mode for additional
2858 6.  Can bonding be used for High Availability?
2861 Yes.  See the section on High Availability for details.