admin-guide/media/vivid.rst

53 all configurable using the following module options:
80 	these module options to vivid:
107 	would use the following module options:
132 	following module options:
265 	This module option can override that for each instance. Values are:
314 Taken together, all these module options allow you to precisely customize
324 can be configured by using the module options num_inputs, input_types and
335 exceeds your kernel's HZ value, then you will get dropped frames, but the
445 The video output device can be configured by using the module options
493 support both. This is determined by the node_types module option. In all
510 support both. This is determined by the node_types module option.
831 	the ccs_cap_mode module option is set to the default value of -1 and if
832 	the no_error_inj module option is set to 0 (the default).
837 	present if the ccs_cap_mode module option is set to the default value of
838 	-1 and if the no_error_inj module option is set to 0 (the default).
844 	module option is set to the default value of -1 and if the no_error_inj
845 	module option is set to 0 (the default).
871 	the ccs_out_mode module option is set to the default value of -1 and if
872 	the no_error_inj module option is set to 0 (the default).
877 	present if the ccs_out_mode module option is set to the default value of
878 	-1 and if the no_error_inj module option is set to 0 (the default).
884 	module option is set to the default value of -1 and if the no_error_inj
885 	module option is set to 0 (the default).
930 The following controls are only present if the no_error_inj module option
966 	queue_setup() op will return -EINVAL.
972 	precise: the videobuf2 buf_prepare() op will return -EINVAL.
978 	start_streaming() op will return -EINVAL.
1054 	updated when you set a new frequency or when you get the tuner status
1151 (see module option n_devs). If there is only one vivid instance (the default), then
1153 If vivid is loaded without module options, then you can connect the S-Video 000-0 input
1183   implement this, it would mean a lot of work to get this right. Since these
1234 but it is also possible to hardcode it when the module is loaded through the
1235 ccs_cap_mode and ccs_out_mode module options. See "Configuring the driver" on
1236 the details of these module options.
1277 multiplanar module option, see "Configuring the driver" for more details on that
1310 framebuffer by setting flag 0x10000 in the node_types module option. The