Documentation/admin-guide/kernel-parameters.txt

190 			it cannot affect the default state of the feature group
194 			care about the state of the feature group strings which
215 			feature group strings, thus specifying it multiple times
220 			feature group strings to debug BIOS issues related to
836 			way will only get added when the related device driver
1059 			Note: to get most of debug_pagealloc error reports, it's
1072 			        get a -EPERM as result when trying to register files
2051 			to get slightly better performance in multiprocessor
2242 			but as a debugging aid, one can get the
2533 			for it. Intended to get systems with badly broken
2539 			interrupt. Intended to get systems with badly broken
2888 			[KVM,ARM,EARLY] Trap guest accesses to GICv3 group-0
2892 			[KVM,ARM,EARLY] Trap guest accesses to GICv3 group-1
2904 			[KVM,ARM] Control when to set WFE instruction trap for
2908 			trap: set WFE instruction trap
2910 			notrap: clear WFE instruction trap
2913 			[KVM,ARM] Control when to set WFI instruction trap for
2917 			trap: set WFI instruction trap
2919 			notrap: clear WFI instruction trap
3381 	max_loop=	[LOOP] The number of loop block devices that get
3401 			Note that you'll get more problems without CMCI than
3402 			with due to the shared banks, i.e. you might get
3937 			after a reply of NFS4ERR_DELAY from the server.
4087 	noautogroup	Disable scheduler automatic task group creation.
4703 		biosirq		[X86-32] Use PCI BIOS calls to get the interrupt
4707 				way to get the interrupt routing table. Try
4770 				This sorting is done to get a device
4860 				may put more devices in an IOMMU group.
4892 				and may put more devices in an IOMMU group.
5392 			each group, which defaults to the square root
5396 			each group's NOCB grace-period kthread.
5399 			Cause the grace-period kthread to get an extra
6267 			debug-uart get routed to the D+ and D- pins of the usb
7477 				MSR_IA32_ARCH_CAPABILITIES.MDS_NO=1 and which get