Lines Matching +full:milli +full:- +full:seconds
3 Contact: linux-iio@vger.kernel.org
11 Contact: linux-iio@vger.kernel.org
25 Contact: linux-iio@vger.kernel.org
31 Contact: linux-iio@vger.kernel.org
38 Contact: linux-iio@vger.kernel.org
44 The contents of the label are free-form, but there are some
51 * "proximity-wifi"
52 * "proximity-lte"
53 * "proximity-wifi-lte"
54 * "proximity-wifi-left"
55 * "proximity-wifi-right"
60 The "-left" and "-right" labels are for devices with multiple
66 * "proximity-palmrest" indicates proximity to the keyboard's palmrest
67 * "proximity-palmrest-left" indicates proximity to the left part of the palmrest
68 * "proximity-palmrest-right" indicates proximity to the right part of the palmrest
69 * "proximity-lap" indicates the device is being used on someone's lap
71 Note "proximity-lap" is special in that its value may be
75 For accelerometers used in 2-in-1s with 360° (yoga-style) hinges,
79 * "accel-base"
80 * "accel-display"
85 * "accel-camera"
89 Contact: linux-iio@vger.kernel.org
99 Contact: linux-iio@vger.kernel.org
110 The stm32-timer-trigger has the additional characteristic that
119 Contact: linux-iio@vger.kernel.org
124 - a small discrete set of values like "0 2 4 6 8"
125 - a range with minimum, step and maximum frequencies like
130 Contact: linux-iio@vger.kernel.org
137 Contact: linux-iio@vger.kernel.org
146 Contact: linux-iio@vger.kernel.org
156 channels refer to the same signal. The 'i' channel contains the in-phase
160 What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
162 Contact: linux-iio@vger.kernel.org
165 channel Y - channel Z where these channel numbers apply to the
173 Contact: linux-iio@vger.kernel.org
182 Contact: linux-iio@vger.kernel.org
187 What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
189 Contact: linux-iio@vger.kernel.org
192 channel Y - channel Z where these channel numbers apply to the
198 What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
200 Contact: linux-iio@vger.kernel.org
224 Contact: linux-iio@vger.kernel.org
230 between ambient (reference) and distant temperature for contact-
232 are milli degrees Celsius.
237 Contact: linux-iio@vger.kernel.org
239 Scaled temperature measurement in milli degrees Celsius.
245 Contact: linux-iio@vger.kernel.org
256 Contact: linux-iio@vger.kernel.org
265 Contact: linux-iio@vger.kernel.org
275 Contact: linux-iio@vger.kernel.org
281 desired period of time, the application should sum-up the delta
289 Contact: linux-iio@vger.kernel.org
295 desired period of time, the application should sum-up the delta
303 Contact: linux-iio@vger.kernel.org
311 Contact: linux-iio@vger.kernel.org
316 Units after application of scale and offset are milli percents
324 Contact: linux-iio@vger.kernel.org
335 Contact: linux-iio@vger.kernel.org
345 Contact: linux-iio@vger.kernel.org
357 Contact: linux-iio@vger.kernel.org
366 Contact: linux-iio@vger.kernel.org
374 Contact: linux-iio@vger.kernel.org
382 Contact: linux-iio@vger.kernel.org
390 Contact: linux-iio@vger.kernel.org
396 Contact: linux-iio@vger.kernel.org
399 scale and offset are milli percent.
403 Contact: linux-iio@vger.kernel.org
405 Scaled humidity measurement in milli percent.
409 Contact: linux-iio@vger.kernel.org
441 Contact: linux-iio@vger.kernel.org
464 What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
504 Contact: linux-iio@vger.kernel.org
539 Contact: linux-iio@vger.kernel.org
554 Contact: linux-iio@vger.kernel.org
558 - a small discrete set of values like "0 2 4 6 8"
559 - a range specified as "[min step max]"
590 Contact: linux-iio@vger.kernel.org
601 Contact: linux-iio@vger.kernel.org
605 - a small discrete set of values like "1 8 16"
606 - a range specified as "[min step max]"
615 Contact: linux-iio@vger.kernel.org
626 Contact: linux-iio@vger.kernel.org
635 Contact: linux-iio@vger.kernel.org
643 Contact: linux-iio@vger.kernel.org
655 What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
662 Contact: linux-iio@vger.kernel.org
677 Contact: linux-iio@vger.kernel.org
684 Contact: linux-iio@vger.kernel.org
693 Contact: linux-iio@vger.kernel.org
703 Contact: linux-iio@vger.kernel.org
712 Contact: linux-iio@vger.kernel.org
724 Contact: linux-iio@vger.kernel.org
736 Contact: linux-iio@vger.kernel.org
760 Contact: linux-iio@vger.kernel.org
770 Contact: linux-iio@vger.kernel.org
780 Contact: linux-iio@vger.kernel.org
807 Contact: linux-iio@vger.kernel.org
828 Contact: linux-iio@vger.kernel.org
831 to user-space.
869 Contact: linux-iio@vger.kernel.org
923 Contact: linux-iio@vger.kernel.org
948 Contact: linux-iio@vger.kernel.org
960 Contact: linux-iio@vger.kernel.org
964 Thus these specify the time in seconds for which the
966 signal is allowed to remain out-of-range before a reset
1016 Contact: linux-iio@vger.kernel.org
1042 Contact: linux-iio@vger.kernel.org
1100 Contact: linux-iio@vger.kernel.org
1150 Contact: linux-iio@vger.kernel.org
1240 Contact: linux-iio@vger.kernel.org
1242 Period of time (in seconds) for which the condition must be
1250 Contact: linux-iio@vger.kernel.org
1260 Contact: linux-iio@vger.kernel.org
1275 Contact: linux-iio@vger.kernel.org
1289 Contact: linux-iio@vger.kernel.org
1315 Contact: linux-iio@vger.kernel.org
1326 Contact: linux-iio@vger.kernel.org
1339 Contact: linux-iio@vger.kernel.org
1352 Contact: linux-iio@vger.kernel.org
1360 Contact: linux-iio@vger.kernel.org
1369 Contact: linux-iio@vger.kernel.org
1379 Contact: linux-iio@vger.kernel.org
1386 Contact: linux-iio@vger.kernel.org
1392 Contact: linux-iio@vger.kernel.org
1403 Contact: linux-iio@vger.kernel.org
1433 What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en
1445 Contact: linux-iio@vger.kernel.org
1468 Contact: linux-iio@vger.kernel.org
1471 and hence the form in which it is read from user-space.
1492 Contact: linux-iio@vger.kernel.org
1530 Contact: linux-iio@vger.kernel.org
1534 what is enabled and may not be contiguous. Thus for user-space
1545 Contact: linux-iio@vger.kernel.org
1552 Contact: linux-iio@vger.kernel.org
1559 Contact: linux-iio@vger.kernel.org
1570 Contact: linux-iio@vger.kernel.org
1579 Contact: linux-iio@vger.kernel.org
1587 Contact: linux-iio@vger.kernel.org
1590 on-chip EEPROM. After power-up or chip reset the device will
1597 Contact: linux-iio@vger.kernel.org
1616 Contact: linux-iio@vger.kernel.org
1633 Contact: linux-iio@vger.kernel.org
1635 Unit-less light intensity. Modifiers both and ir indicate
1645 Contact: linux-iio@vger.kernel.org
1659 Contact: linux-iio@vger.kernel.org
1662 seconds. If shared across all channels of a given type,
1667 Contact: linux-iio@vger.kernel.org
1669 Number of seconds in which to compute speed.
1673 Contact: linux-iio@vger.kernel.org
1685 Contact: linux-iio@vger.kernel.org
1695 Contact: linux-iio@vger.kernel.org
1705 channels refer to the same signal. The 'i' channel contains the in-phase
1714 Contact: linux-iio@vger.kernel.org
1723 Contact: linux-iio@vger.kernel.org
1731 Contact: linux-iio@vger.kernel.org
1739 Contact: linux-iio@vger.kernel.org
1747 Contact: linux-iio@vger.kernel.org
1749 Specifies number of seconds in which we compute the steps
1754 Contact: linux-iio@vger.kernel.org
1764 Non-blocking read will retrieve the available samples from the
1772 Contact: linux-iio@vger.kernel.org
1774 A read-only value indicating the bytes of data available in the
1782 Contact: linux-iio@vger.kernel.org
1784 A read-only boolean value that indicates if the hardware fifo is
1806 Contact: linux-iio@vger.kernel.org
1811 The maximum timeout in seconds can be specified by setting
1817 Contact: linux-iio@vger.kernel.org
1819 Read-only entry that contains a single integer specifying the
1825 buffers are limited to 32-64 samples, some hardware buffers
1831 Contact: linux-iio@vger.kernel.org
1842 Contact: linux-iio@vger.kernel.org
1853 Contact: linux-iio@vger.kernel.org
1870 Contact: linux-iio@vger.kernel.org
1880 Contact: linux-iio@vger.kernel.org
1901 Contact: linux-iio@vger.kernel.org
1911 Contact: linux-iio@vger.kernel.org
1918 Contact: linux-iio@vger.kernel.org
1929 Contact: linux-iio@vger.kernel.org
1932 base-10 logarithm of hydrodium ions in a litre of water.
1940 Contact: linux-iio@vger.kernel.org
1951 way (platform data and / or device-tree), the main hardware
1961 [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
1977 An implementor might consider that for a hand-held device, a
1991 front-view camera;
1998 Contact: linux-iio@vger.kernel.org
2006 Contact: linux-iio@vger.kernel.org
2016 Contact: linux-iio@vger.kernel.org
2027 Contact: linux-iio@vger.kernel.org
2033 - "up" : counter device is increasing.
2034 - "down": counter device is decreasing.
2038 Contact: linux-iio@vger.kernel.org
2047 Contact: linux-iio@vger.kernel.org
2056 Contact: linux-iio@vger.kernel.org
2070 Contact: linux-iio@vger.kernel.org
2079 Contact: linux-iio@vger.kernel.org
2081 List of valid periods (in seconds) for which the light intensity
2086 Contact: linux-iio@vger.kernel.org
2093 Contact: linux-iio@vger.kernel.org
2100 Contact: linux-iio@vger.kernel.org
2103 calculation in milli degrees Celsius.
2109 Contact: linux-iio@vger.kernel.org
2116 Contact: linux-iio@vger.kernel.org
2127 Contact: linux-iio@vger.kernel.org
2136 Contact: linux-iio@vger.kernel.org
2140 contaminant build-up in a measurement chamber or optical
2151 Contact: linux-iio@vger.kernel.org
2168 Contact: linux-iio@vger.kernel.org
2172 - a range specified as "[min step max]"
2178 Contact: linux-iio@vger.kernel.org
2188 Contact: linux-iio@vger.kernel.org
2195 Contact: linux-iio@vger.kernel.org
2200 Units and the exact meaning of value are device-specific.
2204 Contact: linux-iio@vger.kernel.org
2212 Contact: linux-iio@vger.kernel.org
2214 Specifies the timeout value in seconds for the tap detector
2217 single-tap's or two double-tap's.
2221 Contact: linux-iio@vger.kernel.org
2223 Lists all available tap reset timeout values. Units in seconds.
2227 Contact: linux-iio@vger.kernel.org
2229 Specifies the minimum quiet time in seconds between the two
2234 Contact: linux-iio@vger.kernel.org
2237 tap. Units in seconds.
2241 Contact: linux-iio@vger.kernel.org
2245 Units in seconds.
2249 Contact: linux-iio@vger.kernel.org
2252 peak. Units in seconds.
2258 Contact: linux-iio@vger.kernel.org
2265 Contact: linux-iio@vger.kernel.org
2267 An example format is 16-bytes, 2-digits-per-byte, HEX-string
2271 What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_type_available
2273 Contact: linux-iio@vger.kernel.org
2278 * "sinc3" - The digital sinc3 filter. Moderate 1st
2280 * "sinc4" - Sinc 4. Excellent noise performance. Long
2282 * "sinc5" - The digital sinc5 filter. Excellent noise
2284 * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
2286 * "sinc3+rej60" - Sinc3 + 60Hz rejection.
2287 * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
2289 * "sinc3+pf1" - Sinc3 + device specific Post Filter 1.
2290 * "sinc3+pf2" - Sinc3 + device specific Post Filter 2.
2291 * "sinc3+pf3" - Sinc3 + device specific Post Filter 3.
2292 * "sinc3+pf4" - Sinc3 + device specific Post Filter 4.
2293 * "wideband" - filter with wideband low ripple passband
2297 What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_type
2299 Contact: linux-iio@vger.kernel.org
2306 Contact: linux-iio@vger.kernel.org
2308 A running period of time (in seconds) for which
2315 Contact: linux-iio@vger.kernel.org
2322 Contact: linux-iio@vger.kernel.org
2330 Contact: linux-iio@vger.kernel.org
2343 Contact: linux-iio@vger.kernel.org
2352 Contact: linux-iio@vger.kernel.org
2358 Contact: linux-iio@vger.kernel.org
2360 Timeout value in seconds for tap gesture confirmation.
2364 Contact: linux-iio@vger.kernel.org
2372 Contact: linux-iio@vger.kernel.org
2378 Contact: linux-iio@vger.kernel.org