Lines Matching +full:keep +full:- +full:pll +full:- +full:enabled
1 // SPDX-License-Identifier: GPL-2.0-only
3 * byt_cr_dpcm_rt5640.c - ASoc Machine driver for Intel Byt CR platform
27 #include <sound/soc-acpi.h>
28 #include <dt-bindings/sound/rt5640.h>
30 #include "../atom/sst-atom-controls.h"
31 #include "../common/soc-intel-quirks.h"
68 #define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */
82 /* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */
92 static int quirk_override = -1;
94 MODULE_PARM_DESC(quirk, "Board-specific quirk override");
108 dev_info(dev, "quirk DMIC1_MAP enabled\n"); in log_quirks()
111 dev_info(dev, "quirk DMIC2_MAP enabled\n"); in log_quirks()
114 dev_info(dev, "quirk IN1_MAP enabled\n"); in log_quirks()
117 dev_info(dev, "quirk IN3_MAP enabled\n"); in log_quirks()
124 dev_info(dev, "quirk realtek,jack-detect-source %ld\n", in log_quirks()
126 dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", in log_quirks()
128 dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", in log_quirks()
132 dev_info(dev, "quirk JD_NOT_INV enabled\n"); in log_quirks()
134 dev_info(dev, "quirk MONO_SPEAKER enabled\n"); in log_quirks()
136 dev_info(dev, "quirk DIFF_MIC enabled\n"); in log_quirks()
138 dev_info(dev, "quirk SSP0_AIF1 enabled\n"); in log_quirks()
143 dev_info(dev, "quirk SSP0_AIF2 enabled\n"); in log_quirks()
148 dev_info(dev, "quirk SSP2_AIF2 enabled\n"); in log_quirks()
152 …dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2… in log_quirks()
159 dev_info(dev, "quirk MCLK_EN enabled\n"); in log_quirks()
164 dev_info(dev, "quirk MCLK_25MHZ enabled\n"); in log_quirks()
166 dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n"); in log_quirks()
175 /* Configure the PLL before selecting it */ in byt_rt5640_prepare_and_enable_pll1()
177 /* use bitclock as PLL input */ in byt_rt5640_prepare_and_enable_pll1()
203 dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); in byt_rt5640_prepare_and_enable_pll1()
210 dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); in byt_rt5640_prepare_and_enable_pll1()
217 #define BYT_CODEC_DAI1 "rt5640-aif1"
218 #define BYT_CODEC_DAI2 "rt5640-aif2"
223 struct snd_soc_dapm_context *dapm = w->dapm; in platform_clock_control()
224 struct snd_soc_card *card = dapm->card; in platform_clock_control()
234 dev_err(card->dev, in platform_clock_control()
236 return -EIO; in platform_clock_control()
241 ret = clk_prepare_enable(priv->mclk); in platform_clock_control()
243 dev_err(card->dev, in platform_clock_control()
260 clk_disable_unprepare(priv->mclk); in platform_clock_control()
265 dev_err(card->dev, "can't set codec sysclk: %d\n", ret); in platform_clock_control()
388 /* Please keep this list alphabetically sorted */
390 { /* Acer Iconia Tab 8 W1-810 */
393 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Iconia W1-810"),
405 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
474 DMI_MATCH(DMI_BOARD_NAME, "BYT-PF02"),
517 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
523 { /* HP Pavilion x2 10-k0XX, 10-n0XX */
525 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
535 { /* HP Pavilion x2 10-p0XX */
538 DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
548 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
604 { /* MPMAN Converter 9, similar hw as the I.T.Works TW891 2-in-1 */
627 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
679 { /* Point of View Mobii TAB-P800W (V2.0) */
696 { /* Point of View Mobii TAB-P800W (V2.1) */
713 { /* Point of View Mobii TAB-P1005W-232 (V2.0) */
753 { /* Toshiba Satellite Click Mini L9W-B */
756 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SATELLITE Click Mini L9W-B"),
765 { /* Toshiba Encore WT8-A */
768 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"),
777 { /* Toshiba Encore WT10-A */
780 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A-103"),
789 { /* Catch-all for generic Insyde tablets, must be last */
813 return -EPROBE_DEFER; in byt_rt5640_add_codec_device_props()
817 props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic1-data-pin", in byt_rt5640_add_codec_device_props()
821 props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic2-data-pin", in byt_rt5640_add_codec_device_props()
827 PROPERTY_ENTRY_BOOL("realtek,in1-differential"); in byt_rt5640_add_codec_device_props()
832 PROPERTY_ENTRY_BOOL("realtek,in3-differential"); in byt_rt5640_add_codec_device_props()
838 "realtek,jack-detect-source", in byt_rt5640_add_codec_device_props()
842 "realtek,over-current-threshold-microamp", in byt_rt5640_add_codec_device_props()
846 "realtek,over-current-scale-factor", in byt_rt5640_add_codec_device_props()
851 props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); in byt_rt5640_add_codec_device_props()
861 struct snd_soc_card *card = runtime->card; in byt_rt5640_init()
863 struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component; in byt_rt5640_init()
868 card->dapm.idle_bias_off = true; in byt_rt5640_init()
870 /* Start with RC clk for jack-detect (we disable MCLK below) */ in byt_rt5640_init()
887 dev_err(card->dev, "unable to add card controls\n"); in byt_rt5640_init()
909 ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); in byt_rt5640_init()
914 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
918 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
922 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
926 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
934 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
938 ret = snd_soc_dapm_add_routes(&card->dapm, in byt_rt5640_init()
953 * to disable a clock that has not been enabled, in byt_rt5640_init()
956 ret = clk_prepare_enable(priv->mclk); in byt_rt5640_init()
958 clk_disable_unprepare(priv->mclk); in byt_rt5640_init()
961 ret = clk_set_rate(priv->mclk, 25000000); in byt_rt5640_init()
963 ret = clk_set_rate(priv->mclk, 19200000); in byt_rt5640_init()
966 dev_err(card->dev, "unable to set MCLK rate\n"); in byt_rt5640_init()
974 &priv->jack, rt5640_pins, in byt_rt5640_init()
977 dev_err(card->dev, "Jack creation failed %d\n", ret); in byt_rt5640_init()
980 snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, in byt_rt5640_init()
982 snd_soc_component_set_jack(component, &priv->jack, NULL); in byt_rt5640_init()
998 rate->min = rate->max = 48000; in byt_rt5640_codec_fixup()
999 channels->min = channels->max = 2; in byt_rt5640_codec_fixup()
1003 /* set SSP0 to 16-bit */ in byt_rt5640_codec_fixup()
1007 /* set SSP2 to 24-bit */ in byt_rt5640_codec_fixup()
1022 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); in byt_rt5640_codec_fixup()
1028 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); in byt_rt5640_codec_fixup()
1037 return snd_pcm_hw_constraint_single(substream->runtime, in byt_rt5640_aif1_startup()
1053 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
1056 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
1060 DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
1063 /* overwritten with HID */ "i2c-10EC5640:00",
1064 /* changed w/ quirk */ "rt5640-aif1")));
1067 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
1081 .name = "Deep-Buffer Audio Port",
1082 .stream_name = "Deep-Buffer Audio",
1091 .name = "SSP2-Codec",
1109 static char byt_rt5640_long_name[40]; /* = "bytcr-rt5640-*-spk-*-mic" */
1111 static char byt_rt5640_components[32]; /* = "cfg-spk:* cfg-mic:*" */
1121 if (!strcmp(component->name, byt_rt5640_codec_name)) { in byt_rt5640_suspend()
1122 dev_dbg(component->dev, "disabling jack detect before suspend\n"); in byt_rt5640_suspend()
1140 if (!strcmp(component->name, byt_rt5640_codec_name)) { in byt_rt5640_resume()
1141 dev_dbg(component->dev, "re-enabling jack detect after resume\n"); in byt_rt5640_resume()
1142 snd_soc_component_set_jack(component, &priv->jack, NULL); in byt_rt5640_resume()
1152 #define CARD_NAME "bytcht rt5640" /* card name will be 'sof-bytcht rt5640' */
1155 #define CARD_NAME "bytcr-rt5640"
1192 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); in snd_byt_rt5640_mc_probe()
1194 return -ENOMEM; in snd_byt_rt5640_mc_probe()
1197 byt_rt5640_card.dev = &pdev->dev; in snd_byt_rt5640_mc_probe()
1198 mach = byt_rt5640_card.dev->platform_data; in snd_byt_rt5640_mc_probe()
1203 if (!strcmp(byt_rt5640_dais[i].codecs->name, in snd_byt_rt5640_mc_probe()
1204 "i2c-10EC5640:00")) { in snd_byt_rt5640_mc_probe()
1211 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); in snd_byt_rt5640_mc_probe()
1214 "i2c-%s", acpi_dev_name(adev)); in snd_byt_rt5640_mc_probe()
1215 put_device(&adev->dev); in snd_byt_rt5640_mc_probe()
1216 byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name; in snd_byt_rt5640_mc_probe()
1224 if (mach->mach_params.acpi_ipc_irq_index == 0) in snd_byt_rt5640_mc_probe()
1234 * with the codec driver/pdata are non-existent in snd_byt_rt5640_mc_probe()
1239 /* format specified: 2 64-bit integers */ in snd_byt_rt5640_mc_probe()
1254 pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, in snd_byt_rt5640_mc_probe()
1258 dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); in snd_byt_rt5640_mc_probe()
1261 dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); in snd_byt_rt5640_mc_probe()
1264 dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); in snd_byt_rt5640_mc_probe()
1270 /* no BIOS indications, assume SSP0-AIF2 connection */ in snd_byt_rt5640_mc_probe()
1274 /* change defaults for Baytrail-CR capture */ in snd_byt_rt5640_mc_probe()
1286 byt_rt5640_quirk = (unsigned long)dmi_id->driver_data; in snd_byt_rt5640_mc_probe()
1287 if (quirk_override != -1) { in snd_byt_rt5640_mc_probe()
1288 dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n", in snd_byt_rt5640_mc_probe()
1298 log_quirks(&pdev->dev); in snd_byt_rt5640_mc_probe()
1302 byt_rt5640_dais[dai_index].codecs->dai_name = "rt5640-aif2"; in snd_byt_rt5640_mc_probe()
1306 byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port"; in snd_byt_rt5640_mc_probe()
1309 priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); in snd_byt_rt5640_mc_probe()
1310 if (IS_ERR(priv->mclk)) { in snd_byt_rt5640_mc_probe()
1311 ret_val = PTR_ERR(priv->mclk); in snd_byt_rt5640_mc_probe()
1313 dev_err(&pdev->dev, in snd_byt_rt5640_mc_probe()
1318 * Fall back to bit clock usage for -ENOENT (clock not in snd_byt_rt5640_mc_probe()
1320 * for all other errors, including -EPROBE_DEFER in snd_byt_rt5640_mc_probe()
1322 if (ret_val != -ENOENT) in snd_byt_rt5640_mc_probe()
1329 "cfg-spk:%s cfg-mic:%s", in snd_byt_rt5640_mc_probe()
1335 "bytcr-rt5640-%s-spk-%s-mic", in snd_byt_rt5640_mc_probe()
1343 platform_name = mach->mach_params.platform; in snd_byt_rt5640_mc_probe()
1350 ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card); in snd_byt_rt5640_mc_probe()
1353 dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", in snd_byt_rt5640_mc_probe()