linux/usb/otg-fsm.h

68  * @adp_change: TRUE when current ADP measurement (n) value, compared to the
70  * @power_up:	TRUE when the OTG device first powers up its USB system and
75  * @a_vbus_vld:	TRUE when VBUS voltage is in regulation
77  * @a_bus_resume: TRUE when the B-device detects that the A-device is signaling
80  * @a_bus_suspend: TRUE when the B-device detects that the A-device has put the
83  * @b_se0_srp:	TRUE when the line has been at SE0 for more than the minimum
85  * @b_ssend_srp: TRUE when the VBUS has been below VOTG_SESS_VLD for more than
87  * @b_sess_vld:	TRUE when the B-device detects that the voltage on VBUS is
89  * @test_device: TRUE when the B-device switches to B-Host and detects an OTG
93  * @a_bus_drop:	TRUE when A-device application needs to power down the bus
94  * @a_bus_req:	TRUE when A-device application wants to use the bus.
103  * @b_bus_suspend: TRUE when the A-device detects that the B-device has put
105  * @b_bus_resume: TRUE when the A-device detects that the B-device is signaling
112  * @drv_vbus:	TRUE when A-device is driving VBUS
113  * @loc_conn:	TRUE when the local device has signaled that it is connected
115  * @loc_sof:	TRUE when the local device is generating activity on the bus
116  * @adp_prb:	TRUE when the local device is in the process of doing
120  * @adp_sns:	TRUE when the B-device is in the process of carrying out
122  * @data_pulse: TRUE when the B-device is performing data line pulsing
126  * a_set_b_hnp_en: TRUE when the A-device has successfully set the
129  * b_srp_done:	TRUE when the B-device has completed initiating SRP
130  * b_hnp_enable: TRUE when the B-device has accepted the