Lines Matching +full:generic +full:- +full:ehci
1 # SPDX-License-Identifier: GPL-2.0
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
28 module will be called xhci-hcd.
55 tristate "Generic xHCI driver for a platform device"
58 Adds an xHCI host driver for a generic platform device, which
91 tristate "xHCI support for Renesas R-Car SoCs"
96 found in Renesas R-Car ARM SoCs.
119 Enables support for XHCI, EHCI and OHCI host controllers
123 modules will be called ohci-platform.ko, ehci-brcm.ko and
124 xhci-plat-hcd.ko
130 tristate "EHCI HCD (USB 2.0) support"
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
138 EHCI controllers are packaged with "companion" host controllers (OHCI
140 will connect to EHCI if the device is high speed, otherwise they
141 connect to a companion controller. If you configure EHCI, you should
146 You may want to read <file:Documentation/usb/ehci.rst>.
149 module will be called ehci-hcd.
155 Some EHCI chips have vendor-specific extensions to integrate
160 This supports the EHCI implementation that's originally
177 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
191 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
200 bool "Use Xilinx usb host EHCI controller core"
205 Xilinx xps USB host controller core is EHCI compliant and has
206 transaction translator built-in. It can be configured to either
211 tristate "Support for Freescale on-chip EHCI USB controller"
217 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
224 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
228 Enables support for the on-chip EHCI controller on
232 tristate "EHCI support for OMAP3 and later chips"
237 Enables support for the on-chip EHCI controller on
241 tristate "Support for Marvell EBU on-chip EHCI USB controller"
245 Enables support for the on-chip EHCI controller on Marvell's
247 Armada 370. This is different from the EHCI implementation
248 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
252 tristate "Support for ST SPEAr on-chip EHCI USB controller"
256 Enables support for the on-chip EHCI controller on
260 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
265 Enable support for the on-chip EHCI controller found on
269 tristate "Support for Atmel on-chip EHCI USB controller"
273 Enables support for the on-chip EHCI controller on
283 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
286 bool "EHCI support for PPC USB controller on OF platform bus"
294 bool "EHCI support for SuperH USB controller"
297 Enables support for the on-chip EHCI controller on the SuperH.
298 If you use the PCI EHCI controller, this option is not necessary.
301 tristate "EHCI support for Samsung S5P/Exynos SoC Series"
304 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
307 tristate "EHCI support for Marvell PXA/MMP USB controller"
311 Enables support for Marvell (including PXA and MMP series) on-chip
313 only be EHCI host. OTG is controller that can switch to host mode.
314 Note that this driver will not work on Marvell's other EHCI
315 controller used by the EBU-type SoCs including Orion, Kirkwood,
317 on-chip EHCI USB controller" for those.
320 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
327 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
328 It is needed for high-speed (480Mbit/sec) USB 2.0 device
332 tristate "Generic EHCI driver for a platform device"
334 Adds an EHCI host driver for a generic platform device, which
340 bool "Octeon on-chip EHCI support (DEPRECATED)"
348 Enable support for the Octeon II SOC's on-chip EHCI
349 controller. It is needed for high-speed (480Mbit/sec)
366 module will be called oxu210hp-hcd.
378 module will be called isp116x-hcd.
390 module will be called isp1362-hcd.
397 an USB2.0 host. It is designed to meet USB2.0 EHCI specification
401 module will be called fotg210-hcd.
404 tristate "MAX3421 HCD (USB-over-SPI) support"
407 The Maxim MAX3421E chip supports standard USB 2.0-compliant
408 full-speed devices either in host or peripheral mode. This
409 driver supports the host-mode of the MAX3421E only.
412 be called max3421-hcd.
421 say Y. On most non-x86 systems, and on x86 hardware that's not using a
424 based system where you're not sure, the "lspci -v" entry will list the
425 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
428 module will be called ohci-hcd.
441 tristate "Support for ST SPEAr on-chip OHCI USB controller"
445 Enables support for the on-chip OHCI controller on
449 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
454 Enable support for the on-chip OHCI controller found on
462 Enables support for the on-chip OHCI controller on
466 tristate "Support for LPC on-chip OHCI USB controller"
472 Enables support for the on-chip OHCI controller on
476 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
480 Enables support for the on-chip OHCI controller on
484 tristate "Support for Atmel on-chip OHCI USB controller"
488 Enables support for the on-chip OHCI controller on
500 Enables support for the on-chip OHCI controller on
520 Enables support for big-endian USB controllers present on the
528 Enables support for little-endian USB controllers present on the
537 tristate "OHCI support for PCI-bus USB controllers"
542 Enables support for PCI-bus plug-in USB controller cards.
570 Enables support for the on-chip OHCI controller on the SuperH.
577 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
587 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
588 It is needed for low-speed USB 1.0 device support.
591 tristate "Generic OHCI driver for a platform device"
593 Adds an OHCI host driver for a generic platform device, which
599 bool "Octeon on-chip OHCI support (DEPRECATED)"
609 Enable support for the Octeon II SOC's on-chip OHCI
610 controller. It is needed for low-speed USB 1.0 device
630 module will be called uhci-hcd.
674 The driver consists of two modules, the "ftdi-elan" module is a
676 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
692 The SL811HS is a single-port USB controller that supports either
698 module will be called sl811-hcd.
715 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
730 module will be called r8a66597-hcd.
742 module will be called renesas-usbhs.
748 This driver enables support for the on-chip USB host in the
752 module will be called "imx21-hcd".
760 Enable support for the EHCI and OCHI host controller on an bcma bus.
762 for ehci and ohci.
772 Enable support for the EHCI and OCHI host controller on an bcma bus.
774 for ehci and ohci.
784 One such test mode is the Embedded High-speed Host Electrical Test
785 (EHSET) for EHCI host controller hardware, specifically the "Single
786 Step Set Feature" test. Typically this will be enabled for On-the-Go
787 or embedded hosts that need to undergo USB-IF compliance testing with