Kconfig - OpenGrok cross reference for /linux-5.10/drivers/usb/host/Kconfig

3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
14 	  Enable this option to support this chip in host controller mode.
24 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 	  "SuperSpeed" host controller hardware.
47 	tristate "Support for additional Renesas xHCI controller with firmware"
49 	  Say 'Y' to enable the support for the Renesas xHCI controller with
69 	  Say 'Y' to enable the support for the xHCI host controller
77 	  Say 'Y' to enable the support for the xHCI host controller
87 	  Say 'Y' to enable the support for the xHCI host controller
95 	  Say 'Y' to enable the support for the xHCI host controller
104 	  Say 'Y' to enable the support for the xHCI host controller
133 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
134 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
135 	  If your USB host controller supports USB 2.0, you will likely want to
136 	  configure this Host Controller Driver.
141 	  connect to a companion controller.  If you configure EHCI, you should
143 	  Controller Driver or UHCI (for Via motherboards) Host Controller
157 	  controller is needed.  It's safe to say "y" even if your
158 	  controller doesn't support this feature.
176 	  Controller, and some of those devices will not work correctly
191 	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
196 		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
200 	bool "Use Xilinx usb host EHCI controller core"
205 		Xilinx xps USB host controller core is EHCI compliant and has
211 	tristate "Support for Freescale on-chip EHCI USB controller"
217 	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
224 	tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
228 	  Enables support for the on-chip EHCI controller on
237 	  Enables support for the on-chip EHCI controller on
241 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
245 	  Enables support for the on-chip EHCI controller on Marvell's
249 	  Marvell PXA/MMP USB controller" for those.
252 	tristate "Support for ST SPEAr on-chip EHCI USB controller"
256 	  Enables support for the on-chip EHCI controller on
260 	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
265 	  Enable support for the on-chip EHCI controller found on
269 	tristate  "Support for Atmel on-chip EHCI USB controller"
273 	  Enables support for the on-chip EHCI controller on
286 	bool "EHCI support for PPC USB controller on OF platform bus"
290 	  Enables support for the USB controller present on the PowerPC
294 	bool "EHCI support for SuperH USB controller"
297 	  Enables support for the on-chip EHCI controller on the SuperH.
298 	  If you use the PCI EHCI controller, this option is not necessary.
304 	  Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
307 	tristate "EHCI support for Marvell PXA/MMP USB controller"
312 	  USB SPH and OTG controller. SPH is a single port host, and it can
313 	  only be EHCI host. OTG is controller that can switch to host mode.
315 	  controller used by the EBU-type SoCs including Orion, Kirkwood,
317 	  on-chip EHCI USB controller" for those.
327 	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
349 	  controller.  It is needed for high-speed (480Mbit/sec)
359 	  The OXU210HP is an USB host/OTG/device controller. Enable this
385 	  Supports the Philips ISP1362 chip as a host controller
396 	  Faraday FOTG210 is an OTG controller which can be configured as
418 	  The Open Host Controller Interface (OHCI) is a standard for accessing
419 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
420 	  UHCI specification.  If your USB host controller follows the OHCI spec,
422 	  USB controller from Intel or VIA, this is appropriate.  If your host
423 	  controller doesn't use PCI, this is probably appropriate.  For a PCI
425 	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
438 	  Enables support for the OHCI controller on OMAP1/2 chips.
441 	tristate "Support for ST SPEAr on-chip OHCI USB controller"
445 	  Enables support for the on-chip OHCI controller on
449 	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
454 	  Enable support for the on-chip OHCI controller found on
462 	  Enables support for the on-chip OHCI controller on
466 	tristate "Support for LPC on-chip OHCI USB controller"
472 	  Enables support for the on-chip OHCI controller on
476 	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
480 	  Enables support for the on-chip OHCI controller on
484 	tristate "Support for Atmel on-chip OHCI USB controller"
488 	  Enables support for the on-chip OHCI controller on
500 	  Enables support for the on-chip OHCI controller on
511 	  controller. This driver cannot currently be a loadable
542 	  Enables support for PCI-bus plug-in USB controller cards.
563 	bool "OHCI support for SuperH USB controller (DEPRECATED)"
570 	  Enables support for the on-chip OHCI controller on the SuperH.
571 	  If you use the PCI OHCI controller, this option is not necessary.
577 	  Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
587 	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
610 	  controller.  It is needed for low-speed USB 1.0 device
619 	  The Universal Host Controller Interface is a standard by Intel for
621 	  host controller). If your USB host controller conforms to this
626 	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
645 	tristate "Freescale QE USB Host Controller support"
650 	  This driver enables support for Freescale QE USB Host Controller
655 	bool "Freescale QE USB Host Controller debug support"
662 	tristate "Elan U132 Adapter Host Controller"
666 	  for PC cards that contain an OHCI host controller. Typical PC cards
669 	  controller.
677 	  controller driver that talks to the OHCI controller within the
692 	  The SL811HS is a single-port USB controller that supports either
694 	  board has this chip, and you want to use it as a host controller.
724 	  The R8A66597 is a USB 2.0 host and peripheral controller.
727 	  to use it as a host controller.  If unsure, say N.
736 	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
739 	  to use it as a host controller.  If unsure, say N.
760 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
772 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
782 	  supported by the host controller drivers.
785 	  (EHSET) for EHCI host controller hardware, specifically the "Single