Lines Matching full:will

22 	 *  will match successfully. The total data is 64 bit, i.e. 16 nibbles
85 	 *  will point to byte 0 of DA address.
95 	 *  will point to byte 0 of DA address.
105 	 *  will point to byte 0 of DA address.
115 	 *  will point to byte 0 of DA address.
146 	 *  SECTAG is explicitly tagged and MACSEC module will only update
159 	 *  If this bit is set to 1, the extracted filed will assume the
166 	 *  If this bit is set to 1, the extracted filed will assume the
213 	/*! 0: the packets will be sent to MAC FIFO
214 	 *  1: The packets will be sent to Debug/Loopback FIFO.
238 	 *  Note: This value need to be set by SW after reset.  It will be
245 	 *  program the new SA's and the H/W will automatically roll over
247 	 *  For normal operation, Enable AN Roll over will be set to '0'
254 	/*! This value indicates the offset where the decryption will start.
258 	/*! 0: Do not protect frames, all the packets will be forwarded
259 	 *     unchanged. MIB counter (OutPktsUntagged) will be updated.
330 	 *  value will match successfully. The total data is 64 bit, i.e.
355 	 *  Should have SCI value in case TCI[SCI_SEND] == 0. This will be
385 	/*! The value of this bit mask will affects how the SC index and SA
423 	 *  If this bit is set to 1, the extracted filed will assume the
431 	 *  If this bit is set to 1, the extracted filed will assume the
456 	/*! 0: the packets will be sent to MAC FIFO
457 	 *  1: The packets will be sent to Debug/Loopback FIFO.
464 	 *     code information. ICV will be stripped for all control packets.
515 	/*! 0: The AN number will not automatically roll over if Next_PN is
517 	 *  1: The AN number will automatically roll over if Next_PN is
608 	 *  will point to byte 0 of DA address.
616 	 *  will point to byte 0 of DA address.
624 	 *  will point to byte 0 of DA address.
632 	 *  will point to byte 0 of DA address.
680 	 *  value will match successfully. The total data is 64 bit, i.e.