drivers/firmware/ti_sci.h

192  * @resets: Programmed state of the reset lines.
193  * @programmed_state:	The state as programmed by set_device.
306  * @programmed_state: Any programmed state of the clock. This is one of
428  *		allowable programmed frequency and does not account for clock
433  *		allowable programmed frequency and does not account for clock
475  *		allowable programmed frequency and does not account for clock
477  * @target_freq_hz: The target clock frequency. The clock will be programmed
480  *		allowable programmed frequency and does not account for clock
661  * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
663  * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
738  * TCHAN_THRD_ID register programmed with the destination thread if the pairing
746  * RCHAN_THRD_ID register programmed with the source thread if the pairing
919  * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
923  * configuration to be programmed into the tx_filt_einfo field of the
927  * configuration to be programmed into the tx_filt_pswords field of the
931  * interpretation configuration to be programmed into the tx_atype field of
935  * passing mechanism configuration to be programmed into the tx_chan_type
939  * configuration to be programmed into the tx_supr_tdpkt field of the channel's
943  * fetch configuration to be programmed into the tx_fetch_size field of the
948  * configuration to be programmed into the count field of the TCHAN_TCREDIT
952  * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
956  * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
959  * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
962  * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
965  * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
971  * configuration to be programmed into the priority field of the channel's
975  * programmed into the tx_burst_size field of the TCHAN_TCFG register.
1034  * fetch configuration to be programmed into the rx_fetch_size field of the
1038  * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
1042  * @rx_priority: UDMAP receive channel receive priority value to be programmed
1045  * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
1048  * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
1052  * configuration to be programmed into the priority field of the channel's
1077  * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
1081  * interpretation configuration to be programmed into the rx_atype field of the
1085  * mechanism configuration to be programmed into the rx_chan_type field of the
1089  * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
1092  * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
1095  * programmed into the rx_burst_size field of the RCHAN_RCFG register.
1161  * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
1164  * UDMAP receive flow PS words present configuration to be programmed into the
1168  * UDMAP receive flow error handling configuration to be programmed into the
1172  * UDMAP receive flow descriptor type configuration to be programmed into the
1176  * UDMAP receive flow start of packet offset configuration to be programmed
1182  * UDMAP receive flow destination queue configuration to be programmed into the
1190  * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
1195  * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
1200  * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
1205  * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
1210  * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
1215  * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
1220  * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
1225  * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
1229  * UDMAP receive flow free descriptor queue 0 configuration to be programmed
1237  * UDMAP receive flow free descriptor queue 1 configuration to be programmed
1245  * UDMAP receive flow free descriptor queue 2 configuration to be programmed
1253  * UDMAP receive flow free descriptor queue 3 configuration to be programmed
1261  * UDMAP receive flow PS words location configuration to be programmed into the