dts/renesas/r8a77980-condor.dts

1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
22 		stdout-path = "serial0:115200n8";
25 	d1_8v: regulator-2 {
26 		compatible = "regulator-fixed";
27 		regulator-name = "D1.8V";
28 		regulator-min-microvolt = <1800000>;
29 		regulator-max-microvolt = <1800000>;
30 		regulator-boot-on;
31 		regulator-always-on;
34 	d3_3v: regulator-0 {
35 		compatible = "regulator-fixed";
36 		regulator-name = "D3.3V";
37 		regulator-min-microvolt = <3300000>;
38 		regulator-max-microvolt = <3300000>;
39 		regulator-boot-on;
40 		regulator-always-on;
43 	hdmi-out {
44 		compatible = "hdmi-connector";
49 				remote-endpoint = <&adv7511_out>;
54 	lvds-decoder {
56 		vcc-supply = <&d3_3v>;
59 			#address-cells = <1>;
60 			#size-cells = <0>;
65 					remote-endpoint = <&lvds0_out>;
72 					remote-endpoint = <&adv7511_in>;
84 	vddq_vin01: regulator-1 {
85 		compatible = "regulator-fixed";
86 		regulator-name = "VDDQ_VIN01";
87 		regulator-min-microvolt = <1800000>;
88 		regulator-max-microvolt = <1800000>;
89 		regulator-boot-on;
90 		regulator-always-on;
93 	x1_clk: x1-clock {
94 		compatible = "fixed-clock";
95 		#clock-cells = <0>;
96 		clock-frequency = <148500000>;
101 	pinctrl-0 = <&canfd0_pins>;
102 	pinctrl-names = "default";
113 	clock-names = "du.0", "dclkin.0";
118 	clock-frequency = <16666666>;
122 	clock-frequency = <32768>;
126 	pinctrl-0 = <&gether_pins>;
127 	pinctrl-names = "default";
129 	phy-mode = "rgmii-id";
130 	phy-handle = <&phy0>;
131 	renesas,no-ether-link;
134 	phy0: ethernet-phy@0 {
135 		rxc-skew-ps = <1500>;
137 		interrupt-parent = <&gpio4>;
143 	pinctrl-0 = <&i2c0_pins>;
144 	pinctrl-names = "default";
147 	clock-frequency = <400000>;
152 		gpio-controller;
153 		#gpio-cells = <2>;
159 		gpio-controller;
160 		#gpio-cells = <2>;
166 		interrupt-parent = <&gpio1>;
168 		avdd-supply = <&d1_8v>;
169 		dvdd-supply = <&d1_8v>;
170 		pvdd-supply = <&d1_8v>;
171 		bgvdd-supply = <&d1_8v>;
172 		dvdd-3v-supply = <&d3_3v>;
174 		adi,input-depth = <8>;
175 		adi,input-colorspace = "rgb";
176 		adi,input-clock = "1x";
179 			#address-cells = <1>;
180 			#size-cells = <0>;
185 					remote-endpoint = <&thc63lvd1024_out>;
192 					remote-endpoint = <&hdmi_con>;
205 				remote-endpoint = <&thc63lvd1024_in>;
212 	pinctrl-0 = <&mmc_pins>;
213 	pinctrl-1 = <&mmc_pins_uhs>;
214 	pinctrl-names = "default", "state_uhs";
216 	vmmc-supply = <&d3_3v>;
217 	vqmmc-supply = <&vddq_vin01>;
218 	mmc-hs200-1_8v;
219 	bus-width = <8>;
220 	non-removable;
229 	clock-frequency = <100000000>;
256 		power-source = <3300>;
262 		power-source = <1800>;
282 	pinctrl-0 = <&qspi0_pins>;
283 	pinctrl-names = "default";
288 		compatible = "spansion,s25fs512s", "jedec,spi-nor";
290 		spi-max-frequency = <50000000>;
291 		spi-rx-bus-width = <4>;
294 			compatible = "fixed-partitions";
295 			#address-cells = <1>;
296 			#size-cells = <1>;
300 				read-only;
304 				read-only;
308 				read-only;
312 				read-only;
316 				read-only;
320 				read-only;
324 				read-only;
326 			uboot-env@700000 {
328 				read-only;
344 	timeout-sec = <60>;
349 	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
350 	pinctrl-names = "default";
356 	clock-frequency = <14745600>;