boot/dts/r8a7792-blanche.dts

1 // SPDX-License-Identifier: GPL-2.0
3  * Device Tree Source for the Blanche board
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
25 		stdout-path = "serial0:115200n8";
33 	d3_3v: regulator-3v3 {
34 		compatible = "regulator-fixed";
35 		regulator-name = "D3.3V";
36 		regulator-min-microvolt = <3300000>;
37 		regulator-max-microvolt = <3300000>;
38 		regulator-boot-on;
39 		regulator-always-on;
45 		phy-mode = "mii";
46 		interrupt-parent = <&irqc>;
48 		smsc,irq-push-pull;
49 		reg-io-width = <4>;
50 		vddvario-supply = <&d3_3v>;
51 		vdd33a-supply = <&d3_3v>;
53 		pinctrl-0 = <&lan89218_pins>;
54 		pinctrl-names = "default";
57 	vga-encoder {
61 			#address-cells = <1>;
62 			#size-cells = <0>;
67 					remote-endpoint = <&du_out_rgb1>;
73 					remote-endpoint = <&vga_in>;
79 	hdmi-out {
80 		compatible = "hdmi-connector";
85 				remote-endpoint = <&adv7511_out>;
91 		compatible = "vga-connector";
95 				remote-endpoint = <&adv7123_out>;
101 		compatible = "fixed-clock";
102 		#clock-cells = <0>;
103 		clock-frequency = <74250000>;
107 		compatible = "fixed-clock";
108 		#clock-cells = <0>;
109 		clock-frequency = <65000000>;
113 		compatible = "gpio-keys";
115 		key-1 {
117 			label = "SW2-1";
118 			wakeup-source;
119 			debounce-interval = <20>;
122 		key-2 {
124 			label = "SW2-2";
125 			wakeup-source;
126 			debounce-interval = <20>;
129 		key-3 {
131 			label = "SW2-3";
132 			wakeup-source;
133 			debounce-interval = <20>;
136 		key-4 {
138 			label = "SW2-4";
139 			wakeup-source;
140 			debounce-interval = <20>;
143 		key-a {
146 			wakeup-source;
147 			debounce-interval = <20>;
150 		key-b {
153 			wakeup-source;
154 			debounce-interval = <20>;
160 		compatible = "gpio-leds";
176 	vcc_sdhi0: regulator-vcc-sdhi0 {
177 		compatible = "regulator-fixed";
179 		regulator-name = "SDHI0 Vcc";
180 		regulator-min-microvolt = <3300000>;
181 		regulator-max-microvolt = <3300000>;
184 		enable-active-high;
189 	clock-frequency = <20000000>;
193 	clock-frequency = <48000000>;
245 	timeout-sec = <60>;
250 	pinctrl-0 = <&scif0_pins>;
251 	pinctrl-names = "default";
257 	pinctrl-0 = <&scif3_pins>;
258 	pinctrl-names = "default";
264 	pinctrl-0 = <&can0_pins>;
265 	pinctrl-names = "default";
271 	pinctrl-0 = <&sdhi0_pins>;
272 	pinctrl-names = "default";
274 	vmmc-supply = <&vcc_sdhi0>;
275 	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
281 	clock-frequency = <400000>;
286 		interrupt-parent = <&irqc>;
289 		adi,input-depth = <8>;
290 		adi,input-colorspace = "rgb";
291 		adi,input-clock = "1x";
294 			#address-cells = <1>;
295 			#size-cells = <0>;
300 					remote-endpoint = <&du_out_rgb0>;
307 					remote-endpoint = <&hdmi_con>;
320 		pinctrl-names = "default";
321 		pinctrl-0 = <&pmic_irq_pins>;
322 		interrupt-parent = <&irqc>;
324 		interrupt-controller;
327 			compatible = "dlg,da9063-rtc";
331 			compatible = "dlg,da9063-watchdog";
337 	pinctrl-0 = <&du0_pins &du1_pins>;
338 	pinctrl-names = "default";
341 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
347 				remote-endpoint = <&adv7511_in>;
352 				remote-endpoint = <&adv7123_in>;