Lines Matching +full:no +full:- +full:otg +full:- +full:pins
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
20 stdout-path = &uart6;
24 compatible = "pwm-backlight";
26 brightness-levels = <0 4 8 16 32 64 128 255>;
27 default-brightness-level = <6>;
31 reg_2p5v: regulator-2p5v {
32 compatible = "regulator-fixed";
33 regulator-name = "2P5V";
34 regulator-min-microvolt = <2500000>;
35 regulator-max-microvolt = <2500000>;
38 reg_3p3v: regulator-3p3v {
39 compatible = "regulator-fixed";
40 regulator-name = "3P3V";
41 regulator-min-microvolt = <3300000>;
42 regulator-max-microvolt = <3300000>;
45 reg_sd1_vmmc: regulator-sd1-vmmc {
46 compatible = "regulator-fixed";
47 regulator-name = "VSD_3V3";
48 regulator-min-microvolt = <3300000>;
49 regulator-max-microvolt = <3300000>;
51 enable-active-high;
54 reg_usb_otg_vbus: regulator-usb-otg-vbus {
55 compatible = "regulator-fixed";
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_usb_otg1>;
58 regulator-name = "usb_otg_vbus";
59 regulator-min-microvolt = <5000000>;
60 regulator-max-microvolt = <5000000>;
64 reg_brcm: regulator-brcm {
65 compatible = "regulator-fixed";
66 enable-active-high;
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_brcm_reg>;
70 regulator-name = "brcm_reg";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
73 startup-delay-us = <200000>;
77 compatible = "vxt,vl050-8048nt-c01";
82 remote-endpoint = <&display_out>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_flexcan1>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_flexcan2>;
101 assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
102 assigned-clock-rates = <786432000>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&pinctrl_enet2>;
108 phy-mode = "rmii";
109 phy-handle = <ðphy1>;
111 phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
112 phy-reset-duration = <1>;
115 #address-cells = <1>;
116 #size-cells = <0>;
118 ethphy1: ethernet-phy@1 {
119 compatible = "ethernet-phy-ieee802.3-c22";
121 max-speed = <100>;
122 interrupt-parent = <&gpio5>;
129 clock-frequency = <100000>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_i2c1>;
141 regulator-min-microvolt = <700000>;
142 regulator-max-microvolt = <1475000>;
143 regulator-boot-on;
144 regulator-always-on;
145 regulator-ramp-delay = <6250>;
150 regulator-min-microvolt = <900000>;
151 regulator-max-microvolt = <1650000>;
152 regulator-boot-on;
153 regulator-always-on;
158 regulator-boot-on;
159 regulator-always-on;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
172 remote-endpoint = <&panel_in>;
178 #pwm-cells = <2>;
179 pinctrl-names = "default";
180 pinctrl-0 = <&pinctrl_pwm3>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_pwm7>;
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_pwm8>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_sai1>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_uart3>;
205 uart-has-rtscts;
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_uart6>;
216 vbus-supply = <®_usb_otg_vbus>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_usb_otg1_id>;
219 dr_mode = "otg";
220 disable-over-current;
226 disable-over-current;
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_usdhc1>;
233 bus-width = <8>;
234 no-1-8-v;
235 non-removable;
236 keep-power-in-suspend;
241 pinctrl-names = "default";
242 pinctrl-0 = <&pinctrl_usdhc2>;
243 no-1-8-v;
244 non-removable;
245 keep-power-in-suspend;
246 wakeup-source;
247 vmmc-supply = <®_brcm>;
252 pinctrl-names = "default";
253 pinctrl-0 = <&pinctrl_wdog>;
254 fsl,ext-reset-output;
259 fsl,pins = <
266 fsl,pins = <
283 fsl,pins = <
290 fsl,pins = <
297 fsl,pins = <
304 fsl,pins = <
311 fsl,pins = <
318 fsl,pins = <
347 fsl,pins = <
358 fsl,pins = <
364 fsl,pins = <
370 fsl,pins = <
376 fsl,pins = <
385 fsl,pins = <
394 fsl,pins = <
403 fsl,pins = <
410 fsl,pins = <
416 fsl,pins = <
422 fsl,pins = <
438 fsl,pins = <
449 fsl,pins = <