boot/dts/imx6dl-colibri-eval-v3.dts

1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
3  * Copyright 2014-2020 Toradex
8 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
13 #include "imx6qdl-colibri.dtsi"
17 	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
23 		reg = <0x10000000 0>;
37 		stdout-path = "serial0:115200n8";
41 	clk16m: clock-16m {
42 		compatible = "fixed-clock";
43 		#clock-cells = <0>;
44 		clock-frequency = <16000000>;
45 		clock-output-names = "clk16m";
48 	gpio-keys {
49 		compatible = "gpio-keys";
50 		pinctrl-names = "default";
51 		pinctrl-0 = <&pinctrl_gpio_keys>;
54 			label = "Wake-Up";
57 			debounce-interval = <10>;
58 			wakeup-source;
63 		compatible = "fsl,imx-parallel-display";
64 		#address-cells = <1>;
65 		#size-cells = <0>;
66 		interface-pix-fmt = "bgr666";
67 		pinctrl-names = "default";
68 		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
72 			reg = <0>;
75 				remote-endpoint = <&ipu1_di0_disp0>;
80 			reg = <1>;
83 				remote-endpoint = <&lcd_panel_in>;
98 				remote-endpoint = <&lcd_display_out>;
105 	brightness-levels = <0 127 191 223 239 247 251 255>;
106 	default-brightness-level = <1>;
116 		reg = <0>;
118 		interrupt-parent = <&gpio3>;
120 		spi-max-frequency = <10000000>;
141 		pinctrl-names = "default";
142 		pinctrl-0 = <&pinctrl_pcap_1>;
143 		reg = <0x4a>;
144 		interrupt-parent = <&gpio1>;
146 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;	/* SODIMM 30 */
153 		reg = <0x68>;
158 	pinctrl-names = "default";
159 	pinctrl-0 = <
182 	remote-endpoint = <&lcd_display_in>;
218 	vbus-supply = <&reg_usb_host_vbus>;
242 		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
243 		reg = <0 0 0x00010000>;
244 		#address-cells = <1>;
245 		#size-cells = <1>;
246 		bank-width = <2>;
247 		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
253 		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
254 		reg = <1 0 0x00010000>;
255 		#address-cells = <1>;
256 		#size-cells = <1>;
257 		bank-width = <2>;
258 		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000