Lines Matching +full:imx28 +full:- +full:mmc
1 // SPDX-License-Identifier: GPL-2.0-or-later
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/gpio/gpio.h>
9 #include "imx28.dtsi"
13 compatible = "eukrea,mbmx28lc", "fsl,imx28";
16 compatible = "pwm-backlight";
18 brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
19 default-brightness-level = <10>;
22 button-sw3 {
23 compatible = "gpio-keys";
24 pinctrl-names = "default";
25 pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
31 wakeup-source;
35 button-sw4 {
36 compatible = "gpio-keys";
37 pinctrl-names = "default";
38 pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
44 wakeup-source;
48 led-d6 {
49 compatible = "gpio-leds";
50 pinctrl-names = "default";
51 pinctrl-0 = <&led_d6_pins_mbmx28lc>;
56 linux,default-trigger = "heartbeat";
60 led-d7 {
61 compatible = "gpio-leds";
62 pinctrl-names = "default";
63 pinctrl-0 = <&led_d7_pins_mbmx28lc>;
68 linux,default-trigger = "default-on";
73 compatible = "simple-bus";
74 #address-cells = <1>;
75 #size-cells = <0>;
78 compatible = "regulator-fixed";
80 regulator-name = "3P3V";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 regulator-always-on;
87 compatible = "regulator-fixed";
89 pinctrl-names = "default";
90 pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
91 regulator-name = "lcd-3v3";
92 regulator-min-microvolt = <3300000>;
93 regulator-max-microvolt = <3300000>;
95 enable-active-high;
99 compatible = "regulator-fixed";
101 pinctrl-names = "default";
102 pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
103 regulator-name = "usb0_vbus";
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
107 enable-active-high;
111 compatible = "regulator-fixed";
113 pinctrl-names = "default";
114 pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
115 regulator-name = "usb1_vbus";
116 regulator-min-microvolt = <5000000>;
117 regulator-max-microvolt = <5000000>;
119 enable-active-high;
124 compatible = "fsl,imx28-mbmx28lc-sgtl5000",
125 "fsl,mxs-audio-sgtl5000";
126 model = "imx28-mbmx28lc-sgtl5000";
127 saif-controllers = <&saif0 &saif1>;
128 audio-codec = <&sgtl5000>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&duart_4pins_a>;
139 pinctrl-names = "default";
140 pinctrl-0 = <&i2c0_pins_a>;
146 #sound-dai-cells = <0>;
147 VDDA-supply = <®_3p3v>;
148 VDDIO-supply = <®_3p3v>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
156 lcd-supply = <®_lcd_3v3>;
161 model = "43WVF1G-0";
162 bits-per-pixel = <16>;
163 bus-width = <18>;
165 display-timings {
166 native-mode = <&timing0>;
168 clock-frequency = <9072000>;
171 hback-porch = <10>;
172 hfront-porch = <5>;
173 vback-porch = <8>;
174 vfront-porch = <8>;
175 hsync-len = <40>;
176 vsync-len = <10>;
177 hsync-active = <0>;
178 vsync-active = <0>;
179 de-active = <1>;
180 pixelclk-active = <1>;
187 fsl,lradc-touchscreen-wires = <4>;
192 gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
194 fsl,pinmux-ids = <
197 fsl,drive-strength = <MXS_DRIVE_4mA>;
199 fsl,pull-up = <MXS_PULL_DISABLE>;
202 gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
204 fsl,pinmux-ids = <
207 fsl,drive-strength = <MXS_DRIVE_4mA>;
209 fsl,pull-up = <MXS_PULL_DISABLE>;
212 lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
214 fsl,pinmux-ids = <
220 fsl,drive-strength = <MXS_DRIVE_4mA>;
222 fsl,pull-up = <MXS_PULL_DISABLE>;
225 led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
227 fsl,pinmux-ids = <
230 fsl,drive-strength = <MXS_DRIVE_4mA>;
232 fsl,pull-up = <MXS_PULL_DISABLE>;
235 led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
237 fsl,pinmux-ids = <
240 fsl,drive-strength = <MXS_DRIVE_4mA>;
242 fsl,pull-up = <MXS_PULL_DISABLE>;
245 reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
247 fsl,pinmux-ids = <
250 fsl,drive-strength = <MXS_DRIVE_4mA>;
252 fsl,pull-up = <MXS_PULL_DISABLE>;
255 reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
257 fsl,pinmux-ids = <
260 fsl,drive-strength = <MXS_DRIVE_4mA>;
262 fsl,pull-up = <MXS_PULL_DISABLE>;
265 reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
267 fsl,pinmux-ids = <
270 fsl,drive-strength = <MXS_DRIVE_4mA>;
272 fsl,pull-up = <MXS_PULL_DISABLE>;
277 pinctrl-names = "default";
278 pinctrl-0 = <&pwm4_pins_a>;
283 pinctrl-names = "default";
284 pinctrl-0 = <&saif0_pins_a>;
289 pinctrl-names = "default";
290 pinctrl-0 = <&saif1_pins_a>;
291 fsl,saif-master = <&saif0>;
296 compatible = "fsl,imx28-mmc";
297 pinctrl-names = "default";
298 pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
299 bus-width = <4>;
300 cd-inverted;
305 disable-over-current;
306 vbus-supply = <®_usb0_vbus>;
308 pinctrl-names = "default";
309 pinctrl-0 = <&usb0_id_pins_b>;
313 vbus-supply = <®_usb1_vbus>;