boot/dts/gemini-wbd222.dts

1 // SPDX-License-Identifier: GPL-2.0
3  * Device Tree file for Wiliboard WBD-222
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
12 	model = "Wiliboard WBD-222";
14 	#address-cells = <1>;
15 	#size-cells = <1>;
19 		reg = <0x00000000 0x8000000>;
24 		stdout-path = &uart0;
28 		compatible = "gpio-keys";
30 		button-setup {
31 			debounce-interval = <100>;
32 			wakeup-source;
41 		compatible = "gpio-leds";
43 		led-red-l3 {
47 			default-state = "off";
49 		led-green-l4 {
53 			default-state = "off";
55 		led-red-l4 {
59 			default-state = "off";
61 		led-green-l3 {
65 			default-state = "on";
66 			linux,default-trigger = "heartbeat";
70 	mdio0: ethernet-phy {
71 		compatible = "virtual,mdio-gpio";
74 		#address-cells = <1>;
75 		#size-cells = <0>;
77 		phy0: ethernet-phy@1 {
78 			reg = <1>;
79 			device_type = "ethernet-phy";
82 		phy1: ethernet-phy@3 {
83 			reg = <3>;
84 			device_type = "ethernet-phy";
92 			reg = <0x30000000 0x00800000>;
96 				reg = <0x00000000 0x00020000>;
97 				read-only;
101 				reg = <0x00020000 0x00100000>;
105 				reg = <0x00120000 0x006a0000>;
109 				reg = <0x007c0000 0x00010000>;
110 				read-only;
114 				reg = <0x007d0000 0x00010000>;
115 				read-only;
119 				reg = <0x007e0000 0x00010000>;
120 				read-only;
127 				 * gpio0agrp cover line 0-4
130 				gpio0_default_pins: pinctrl-gpio0 {
137 				pinctrl-gmii {
148 			pinctrl-names = "default";
149 			pinctrl-0 = <&gpio0_default_pins>;
154 			interrupt-map-mask = <0xf800 0 0 7>;
155 			interrupt-map =
177 			ethernet-port@0 {
178 				phy-mode = "rgmii";
179 				phy-handle = <&phy0>;
181 			ethernet-port@1 {
182 				phy-mode = "rgmii";
183 				phy-handle = <&phy1>;