boot/dts/bcm53573.dtsi

1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 	#address-cells = <1>;
13 	#size-cells = <1>;
14 	interrupt-parent = <&gic>;
21 		stdout-path = "serial0:115200n8";
25 		#address-cells = <1>;
26 		#size-cells = <0>;
30 			compatible = "arm,cortex-a7";
31 			reg = <0x0>;
36 		compatible = "simple-bus";
38 		#address-cells = <1>;
39 		#size-cells = <1>;
41 		gic: interrupt-controller@1000 {
42 			compatible = "arm,cortex-a7-gic";
43 			#interrupt-cells = <3>;
44 			#address-cells = <0>;
45 			interrupt-controller;
46 			reg = <0x1000 0x1000>,
52 		compatible = "arm,armv7-timer";
60 		#address-cells = <1>;
61 		#size-cells = <1>;
65 			#clock-cells = <0>;
66 			compatible = "fixed-clock";
67 			clock-frequency = <40000000>;
72 		compatible = "brcm,bus-axi";
73 		reg = <0x18000000 0x1000>;
75 		#address-cells = <1>;
76 		#size-cells = <1>;
78 		#interrupt-cells = <1>;
79 		interrupt-map-mask = <0x000fffff 0xffff>;
80 		interrupt-map =
108 			compatible = "simple-bus";
109 			reg = <0x00000000 0x1000>;
112 			#address-cells = <1>;
113 			#size-cells = <1>;
115 			gpio-controller;
116 			#gpio-cells = <2>;
120 				reg = <0x0300 0x100>;
121 				interrupt-parent = <&gic>;
129 			reg = <0x00002000 0x1000>;
133 			reg = <0x4000 0x1000>;
135 			#address-cells = <1>;
136 			#size-cells = <1>;
139 				compatible = "generic-ehci";
140 				reg = <0x4000 0x1000>;
141 				interrupt-parent = <&gic>;
144 				#address-cells = <1>;
145 				#size-cells = <0>;
148 					reg = <1>;
149 					#trigger-source-cells = <0>;
153 					reg = <2>;
154 					#trigger-source-cells = <0>;
159 				#usb-cells = <0>;
161 				compatible = "generic-ohci";
162 				reg = <0xd000 0x1000>;
163 				interrupt-parent = <&gic>;
166 				#address-cells = <1>;
167 				#size-cells = <0>;
170 					reg = <1>;
171 					#trigger-source-cells = <0>;
175 					reg = <2>;
176 					#trigger-source-cells = <0>;
182 			reg = <0x5000 0x1000>;
186 			reg = <0xb000 0x1000>;
190 			compatible = "simple-mfd", "syscon";
191 			reg = <0x00012000 0x00001000>;
194 				compatible = "brcm,bcm53573-ilp";
196 				#clock-cells = <0>;
197 				clock-output-names = "ilp";