boot/dts/am3517-evm.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "am3517-som.dtsi"
9 #include "am3517-evm-ui.dtsi"
10 #include <dt-bindings/input/input.h>
14 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
21 		stdout-path = &uart3;
26 		reg = <0x80000000 0x10000000>; /* 256 MB */
30                 compatible = "regulator-fixed";
31                 regulator-name = "vmmc_fixed";
32                 regulator-min-microvolt = <3300000>;
33                 regulator-max-microvolt = <3300000>;
36 	gpio-keys {
37 		compatible = "gpio-keys-polled";
38 		poll-interval = <100>;
95 	gpio-leds {
96 		compatible = "gpio-leds";
98 		pinctrl-names = "default";
99 		pinctrl-0 = <&leds_pins>;
104 			default-state = "on";
110 			default-state = "on";
116 			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
122 			linux,default-trigger = "heartbeat";
129 		compatible = "newhaven,nhd-4.3-480272ef-atxl";
132 		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
133 		vcc-supply = <&vdd_io_reg>;
137 				remote-endpoint = <&dpi_out>;
143 		compatible = "pwm-backlight";
144 		pinctrl-names = "default";
145 		power-supply = <&vdd_io_reg>;
146 		pinctrl-0 = <&backlight_pins>;
148 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
149 		default-brightness-level = <7>;
150 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
153 	pwm11: dmtimer-pwm@11 {
154 		compatible = "ti,omap-dmtimer-pwm";
155 		pinctrl-names = "default";
156 		pinctrl-0 = <&pwm_pins>;
158 		#pwm-cells = <3>;
159 		ti,clock-source = <0x01>;
164 		compatible = "usb-nop-xceiv";
165 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
166 		#phy-cells = <0>;
181 	pinctrl-names = "default";
182 	pinctrl-0 = <&dss_dpi_pins>;
184 	vdds_dsi-supply = <&vdd_io_reg>;
185 	vdda_video-supply = <&vdd_io_reg>;
189 			remote-endpoint = <&lcd_in>;
190 			data-lines = <16>;
196 	clock-frequency = <400000>;
200 		reg = <0x21>;
201 		gpio-controller;
202 		#gpio-cells = <2>;
203 		vcc-supply = <&vdd_io_reg>;
208 	clock-frequency = <400000>;
213 	pinctrl-names = "default";
214 	pinctrl-0 = <&mmc1_pins>;
215 	vmmc-supply = <&vmmc_fixed>;
216 	bus-width = <4>;
217 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
218 	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
226 	port1-mode = "ehci-phy";
234 	pinctrl-names = "default";
235 	pinctrl-0 = <&hsusb1_rst_pins>;
238 		pinctrl-single,pins = <
245 		pinctrl-single,pins = <
258 		pinctrl-single,pins = <
264 		pinctrl-single,pins = <
270 		pinctrl-single,pins = <
296 		pinctrl-single,pins = <
303 	pinctrl-names = "default";
304 	pinctrl-0 = <&hsusb1_pins>;
307 		pinctrl-single,pins = <