Lines Matching +full:reg +full:- +full:names
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
11 #include <dt-bindings/input/input.h>
15 compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
29 operating-points = <
34 voltage-tolerance = <2>; /* 2 percentage */
35 cpu0-supply = <&dcdc2_reg>;
40 compatible = "gpio-keys";
46 debounce-interval = <1000>;
47 wakeup-source;
54 debounce-interval = <1000>;
55 wakeup-source;
60 pinctrl-names = "default";
61 pinctrl-0 = <&user_leds_s0>;
63 compatible = "gpio-leds";
68 default-state = "off";
74 linux,default-trigger = "timer";
75 default-state = "on";
81 default-state = "off";
87 default-state = "off";
93 default-state = "off";
99 default-state = "off";
105 reg = <0x80000000 0x20000000>; /* 512 MB */
109 compatible = "regulator-fixed";
110 regulator-name = "vmmcsd_fixed";
111 regulator-min-microvolt = <3300000>;
112 regulator-max-microvolt = <3300000>;
121 pinctrl-names = "default", "sleep";
122 pinctrl-0 = <&davinci_mdio_default>;
123 pinctrl-1 = <&davinci_mdio_sleep>;
126 ethernetphy0: ethernet-phy@0 {
127 reg = <0>;
128 smsc,disable-energy-detect;
136 pinctrl-names = "default";
137 pinctrl-0 = <&ehrpwm1_pins>;
144 gpio-hog;
146 output-high;
147 line-name = "homematic_reset";
151 gpio-hog;
153 output-high;
154 line-name = "homematic_program";
160 gpio-hog;
162 output-low;
163 line-name = "zigbee_reset";
167 gpio-hog;
169 output-high;
170 line-name = "zigbee_boot";
175 pinctrl-names = "default";
176 pinctrl-0 = <&i2c0_pins>;
178 clock-frequency = <400000>;
181 reg = <0x24>;
187 reg = <0x50>;
192 reg = <0x51>;
197 pinctrl-names = "default", "sleep";
198 pinctrl-0 = <&cpsw_default>;
199 pinctrl-1 = <&cpsw_sleep>;
203 phy-mode = "mii";
204 phy-handle = <ðernetphy0>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&mmc1_pins>;
211 bus-width = <0x4>;
212 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
213 cd-inverted;
214 max-frequency = <26000000>;
215 vmmc-supply = <&vmmcsd_fixed>;
220 pinctrl-names = "default";
221 pinctrl-0 = <&emmc_pins>;
222 bus-width = <8>;
223 max-frequency = <26000000>;
224 sd-uhs-sdr25;
225 vmmc-supply = <&vmmcsd_fixed>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&mmc3_pins>;
232 bus-width = <4>;
233 cap-power-off-card;
234 max-frequency = <26000000>;
235 sd-uhs-sdr25;
236 vmmc-supply = <&vmmcsd_fixed>;
241 ti,no-init;
250 ti,pmic-shutdown-controller;
253 #address-cells = <1>;
254 #size-cells = <0>;
257 reg = <0>;
258 regulator-name = "vdds_dpr";
259 regulator-compatible = "dcdc1";
260 regulator-min-microvolt = <1300000>;
261 regulator-max-microvolt = <1450000>;
262 regulator-boot-on;
263 regulator-always-on;
267 reg = <1>;
269 * VDD_MPU voltage limits 0.95V - 1.26V with
270 * +/-4% tolerance
272 regulator-compatible = "dcdc2";
273 regulator-name = "vdd_mpu";
274 regulator-min-microvolt = <925000>;
275 regulator-max-microvolt = <1375000>;
276 regulator-boot-on;
277 regulator-always-on;
278 regulator-ramp-delay = <70000>;
282 reg = <2>;
284 * VDD_CORE voltage limits 0.95V - 1.1V with
285 * +/-4% tolerance
287 regulator-name = "vdd_core";
288 regulator-compatible = "dcdc3";
289 regulator-min-microvolt = <925000>;
290 regulator-max-microvolt = <1125000>;
291 regulator-boot-on;
292 regulator-always-on;
296 reg = <3>;
297 regulator-name = "vio,vrtc,vdds";
298 regulator-compatible = "ldo1";
299 regulator-min-microvolt = <1000000>;
300 regulator-max-microvolt = <1800000>;
301 regulator-always-on;
305 reg = <4>;
306 regulator-name = "vdd_3v3aux";
307 regulator-compatible = "ldo2";
308 regulator-min-microvolt = <900000>;
309 regulator-max-microvolt = <3300000>;
310 regulator-always-on;
314 reg = <5>;
315 regulator-name = "vdd_1v8";
316 regulator-compatible = "ldo3";
317 regulator-min-microvolt = <900000>;
318 regulator-max-microvolt = <1800000>;
319 regulator-always-on;
323 reg = <6>;
324 regulator-name = "vdd_3v3a";
325 regulator-compatible = "ldo4";
326 regulator-min-microvolt = <1800000>;
327 regulator-max-microvolt = <3300000>;
328 regulator-always-on;
334 pinctrl-names = "default";
335 pinctrl-0 = <&uart0_pins>;
340 pinctrl-names = "default";
341 pinctrl-0 = <&uart1_pins>;
346 pinctrl-names = "default";
347 pinctrl-0 = <&uart2_pins>;
352 pinctrl-names = "default";
353 pinctrl-0 = <&uart4_pins>;
362 pinctrl-names = "default";
363 pinctrl-0 = <&clkout2_pin>;
366 pinctrl-single,pins = <
373 pinctrl-single,pins = <
392 pinctrl-single,pins = <
411 pinctrl-single,pins = <
418 pinctrl-single,pins = <
426 pinctrl-single,pins = <
432 pinctrl-single,pins = <
447 pinctrl-single,pins = <
454 pinctrl-single,pins = <
460 pinctrl-single,pins = <
471 pinctrl-single,pins = <
480 pinctrl-single,pins = <
489 pinctrl-single,pins = <
496 pinctrl-single,pins = <
503 pinctrl-single,pins = <