boot/dts/am335x-chiliboard.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
6 /dts-v1/;
7 #include "am335x-chilisom.dtsi"
11 	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
15 		stdout-path = &uart0;
19 		compatible = "gpio-leds";
20 		pinctrl-names = "default";
21 		pinctrl-0 = <&led_gpio_pins>;
26 			default-state = "keep";
27 			linux,default-trigger = "heartbeat";
33 			default-state = "keep";
40 		pinctrl-single,pins = <
47 		pinctrl-single,pins = <
61 		pinctrl-single,pins = <
76 		pinctrl-single,pins = <
85 		pinctrl-single,pins = <
93 		pinctrl-single,pins = <
99 		pinctrl-single,pins = <
111 		pinctrl-single,pins = <
119 	pinctrl-names = "default";
120 	pinctrl-0 = <&uart0_pins>;
126 	regulator-min-microvolt = <3300000>;
127 	regulator-max-microvolt = <3300000>;
133 	pinctrl-names = "default", "sleep";
134 	pinctrl-0 = <&cpsw_default>;
135 	pinctrl-1 = <&cpsw_sleep>;
140 	pinctrl-names = "default", "sleep";
141 	pinctrl-0 = <&davinci_mdio_default>;
142 	pinctrl-1 = <&davinci_mdio_sleep>;
145 	ethphy0: ethernet-phy@0 {
151 	phy-handle = <&ethphy0>;
152 	phy-mode = "rmii";
157 	pinctrl-names = "default";
158 	pinctrl-0 = <&usb1_drvvbus>;
164 	pinctrl-names = "default";
165 	pinctrl-0 = <&sd_pins>;
166 	vmmc-supply = <&ldo4_reg>;
167 	bus-width = <0x4>;
168 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
173 	interrupt-parent = <&intc>;