media/dvb/fe_property_parameters.rst

9 There are several different Digital TV parameters that can be used by
20 Used internally. A GET/SET operation for it won't change or return
175 Used on cable and satellite delivery systems.
185 Used on cable and satellite delivery systems.
195 Used on satellite delivery systems.
197 The voltage is usually used with non-DiSEqC capable LNBs to switch the
210 Currently not used.
218 Used on DVB-S2.
230 Used on DVB-S2.
276 Used only on ISDB.
296 Used only on ISDB.
310 Used only on ISDB.
331 is used to help the demodulator to synchronize on the channel.
336 ``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the
347 Used only on ISDB.
365 Used only on ISDB.
382 Used only on ISDB.
400 Used only on ISDB.
412 In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
416 Only the values of the first 3 bits are used. Other bits will be silently ignored:
432 Used only on ISDB.
434 The Forward Error Correction mechanism used by a given ISDB Layer, as
447 Used only on ISDB.
449 The modulation used by a given ISDB Layer, as defined by
467 Used only on ISDB.
558 Used only on ISDB.
633 Used only on ATSC-MH.
637 FIC is used for relaying information to allow rapid service acquisition
648 Used only on ATSC-MH.
663 Used only on ATSC-MH.
675 Used only on ATSC-MH.
688 Used only on ATSC-MH.
700 Used only on ATSC-MH.
712 Used only on ATSC-MH.
724 Used only on ATSC-MH.
736 Used only on ATSC-MH.
748 Used only on ATSC-MH.
760 Used only on ATSC-MH.
772 Used only on ATSC-MH.
783 Used only on ATSC-MH.
796 Used only on ATSC-MH.
809 Used only on ATSC-MH.
830 Used on terrestrial transmissions.
840 Used on terrestrial transmissions.
858       and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at
861       ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
871 Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB.
874 carriers) used by the standard.
907 Used only on DVB-T and DVB-T2.
919 Used on DVB-S2, DVB-T2 and ISDB-S.
951 introduction, FE_GET_INFO was used to determine a frontend type. A
967 Time interleaving to be used.
997 Used on DVB-S2.
1003 it can be used to read the scrambling sequence index (EN 300 468 table 41).
1005 By default, gold scrambling sequence index 0 is used.