networking/dsa/b53.rst

1 .. SPDX-License-Identifier: GPL-2.0
20 The switch is, if possible, configured to enable a Broadcom specific 4-bytes
21 switch tag which gets inserted by the switch for every packet forwarded to the
30 configuration described in the :ref:`dsa-config-showcases`.
33 ----------------------------------
35 The tagging based configuration is desired. It is not specific to the b53
38 See :ref:`dsa-tagged-configuration`.
41 -------------------------------------
48 The configuration slightly differ from the :ref:`dsa-vlan-configuration`.
54 In difference to the configuration described in :ref:`dsa-vlan-configuration`
55 the default VLAN 1 has to be removed from the slave interface configuration in
56 single port and gateway configuration, while there is no need to add an extra
64 .. code-block:: sh
71   # The master interface needs to be brought up before the slave ports.
85   # activate VLAN filtering
88   # add ports to bridges
111 .. code-block:: sh
116   # The master interface needs to be brought up before the slave ports.
128   # activate VLAN filtering
131   # add ports to bridge
146 .. code-block:: sh
152   # The master interface needs to be brought up before the slave ports.
165   # activate VLAN filtering
168   # add ports to bridges