ethernet/dec/de4x5.rst

1 .. SPDX-License-Identifier: GPL-2.0
10 	 - DE425 TP/COAX EISA
11 	 - DE434 TP PCI
12 	 - DE435 TP/COAX/AUI PCI
13 	 - DE450 TP/COAX/AUI PCI
14 	 - DE500 10/100 PCI Fasternet
20 	 - DC21040  (no SROM)
21 	 - DC21041[A]
22 	 - DC21140[A]
23 	 - DC21142
24 	 - DC21143
28 	 - KINGSTON
29 	 - Linksys
30 	 - ZNYX342
31 	 - SMC8432
32 	 - SMC9332 (w/new SROM)
33 	 - ZNYX31[45]
34 	 - ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
48     measurement. Their error is +/-20k on a quiet (private) network and also
51 ----------------------------------------------------------------------------
81     3) compile  de4x5.c, but include -DMODULE in  the command line to ensure
93     Automedia detection is included so that in  principle you can disconnect
106     auto  media sense algorithm is  that it can now  use one that is more in
113     The SMC9332 card  has a non-compliant SROM  which needs fixing -  I have
115     to a previous DEC-STD format.
154     Where SROM media  detection is used and  full duplex is specified in the
155     SROM,  the feature is  ignored unless  lp->params.fdx  is set at compile
159     autonegotiation feature in  the SROM autoconf  code, this detection will
164     and media. The only lexical constraints are:  the board name (dev->name)
172 		       sub-parameters:
173 		       TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
176     Case sensitivity is important  for  the sub-parameters. They *must*   be
183 	DE4X5_OPTS = -DDE4X5_PARM='"eth0:fdx autosense=AUI eth2:autosense=TP"'
186     examples. By default, full duplex is turned  off and AUTO is the default