acpi/dsd/graph.rst

46 "X" is the number of the port. An example of such a package would be::
48     Package() { "port@4", "PRT4" }
55 package would be::
57     Package() { "endpoint@0", "EP40" }
68 name followed by a reference in the same package. Such references consist of
69 the remote device reference, the first package entry of the port data extension
70 reference under the device and finally the first package entry of the endpoint
73     Package() { device, "port@X", "endpoint@Y" }
87 	    Name (_DSD, Package () {
89 		Package () {
90 		    Package () { "compatible", Package () { "nokia,smia" } },
93 		Package () {
94 		    Package () { "port@0", "PRT0" },
97 	    Name (PRT0, Package() {
99 		Package () {
100 		    Package () { "reg", 0 },
103 		Package () {
104 		    Package () { "endpoint@0", "EP00" },
107 	    Name (EP00, Package() {
109 		Package () {
110 		    Package () { "reg", 0 },
111 		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
121 	    Name (_DSD, Package () {
123 		Package () {
124 		    Package () { "port@4", "PRT4" },
128 	    Name (PRT4, Package() {
130 		Package () {
131 		    Package () { "reg", 4 }, /* CSI-2 port number */
134 		Package () {
135 		    Package () { "endpoint@0", "EP40" },
139 	    Name (EP40, Package() {
141 		Package () {
142 		    Package () { "reg", 0 },
143 		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },