bindings/pinctrl/qcom%2Cmdm9615-pinctrl.txt

6 - compatible:
9 	Definition: must be "qcom,mdm9615-pinctrl"
11 - reg:
13 	Value type: <prop-encoded-array>
16 - interrupts:
18 	Value type: <prop-encoded-array>
21 - interrupt-controller:
26 - #interrupt-cells:
30 		    in <dt-bindings/interrupt-controller/irq.h>
32 - gpio-controller:
35 	Definition: identifies this node as a gpio controller
37 - #gpio-cells:
41 		    in <dt-bindings/gpio/gpio.h>
43 - gpio-ranges:
45 	Definition:  see ../gpio/gpio.txt
47 - gpio-reserved-ranges:
49 	Definition: see ../gpio/gpio.txt
51 Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
52 a general description of GPIO and interrupt bindings.
54 Please refer to pinctrl-bindings.txt in this directory for details of the
62 parameters, such as pull-up, drive strength, etc.
77 The following generic properties as defined in pinctrl-bindings.txt are valid
80 - pins:
82 	Value type: <string-array>
83 	Definition: List of gpio pins affected by the properties specified in
85 		    gpio0-gpio87
87 - function:
93 		    gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
97 - bias-disable:
102 - bias-pull-down:
107 - bias-pull-up:
112 - output-high:
118 - output-low:
124 - drive-strength:
133 		compatible = "qcom,mdm9615-pinctrl";
136 		gpio-controller;
137 		#gpio-cells = <2>;
138 		gpio-ranges = <&msmgpio 0 0 88>;
139 		interrupt-controller;
140 		#interrupt-cells = <2>;
143 		gsbi8_uart: gsbi8-uart {
151 				drive-strength = <4>;
152 				bias-disable;
157 				drive-strength = <2>;
158 				bias-pull-up;