net/dsa/b53.txt

6 - compatible: For external switch chips, compatible string must be exactly one
18       "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
20   For the BCM5310x SoCs with an integrated switch, must be one of:
21       "brcm,bcm53010-srab"
22       "brcm,bcm53011-srab"
23       "brcm,bcm53012-srab"
24       "brcm,bcm53018-srab"
25       "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
27   For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
28       "brcm,bcm11404-srab"
29       "brcm,bcm11407-srab"
30       "brcm,bcm11409-srab"
31       "brcm,bcm58310-srab"
32       "brcm,bcm58311-srab"
33       "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
35   For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
36       "brcm,bcm58522-srab"
37       "brcm,bcm58523-srab"
38       "brcm,bcm58525-srab"
39       "brcm,bcm58622-srab"
40       "brcm,bcm58623-srab"
41       "brcm,bcm58625-srab"
42       "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
44   For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
45       "brcm,bcm3384-switch"
46       "brcm,bcm6328-switch"
47       "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
51  - reg: a total of 3 register base addresses, the first one must be the
52    Switch Register Access block base, the second is the port 5/4 mux
53    configuration register and the third one is the SGMII configuration
56  - interrupts: a total of 13 interrupts must be specified, in the following
57    order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
63   - reg-names: a total of 3 names matching the 3 base register address, must
69   - interrupt-names: a total of 13 names matching the 13 interrupts specified
79 	"phy"
96 		fixed-link {
98 			full-duplex;
103 		compatible = "brcm,unimac-mdio";
104 		#address-cells = <1>;
105 		#size-cells = <0>;
107 		switch0: ethernet-switch@1e {
110 			#address-cells = <1>;
111 			#size-cells = <0>;
114 				#address-cells = <1>;
115 				#size-cells = <0>;
129 					label = "cable-modem";
130 					fixed-link {
132 						full-duplex;
134 					phy-mode = "rgmii-txid";
140 					fixed-link {
142 						full-duplex;
144 					phy-mode = "rgmii-txid";