Lines Matching +full:boot +full:- +full:method
16 - Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
18 - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
20 - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
24 - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
32 **Boot Error Record Table**
37 BOOT Signature Reserved (signature == "BOOT")
39 **simple BOOT flag table**
45 **Boot Graphics Resource Table**
47 Optional, not currently supported, with no real use-case for an
55 time as ARM-compatible hardware is available, and the specification
123 UEFI-based; if it is UEFI-based, this table may be supplied. When this
139 the hardware reduced profile, and only 64-bit address fields will
156 filled in properly - that the PSCI_COMPLIANT flag is set and that
157 PSCI_USE_HVC is set or unset as needed (see table 5-37).
178 ARM-specific error sources have been defined; please use those or the
195 **iSCSI Boot Firmware Table**
207 when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
230 should be used (types 0xA - 0xF).
234 **Memory-mapped ConFiGuration space**
312 Since this table can only provide 32-bit addresses, it is deprecated
433 ------------
442 _CCA 6.2.17 This method must be defined for all bus masters
443 on arm64 - there are no assumptions made about
450 NB: this method provides default cache coherency
453 default to non-coherent, but be made coherent with
469 of C-states.
489 _DSM 9.1.1 Do not use this method. It is not standardized, the
515 _OFF 7.2.2 It is recommended to define this method for any device
518 _ON 7.2.3 It is recommended to define this method for any device
521 \_OS 5.7.3 This method will return "Linux" by default (this is
526 _OSC 6.2.11 This method can be a global method in ACPI (i.e.,
529 as a global method, only capabilities published in
531 a device-specific method, the process described for
533 out-of-process use of _OSC is not allowed. That is,
534 submit the device-specific _OSC usage description as
542 is provided. The _OSC method is to be used instead.
546 \_PIC 5.8.1 The method should not be used. On arm64, the only
555 _PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
558 _PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
574 _STA 6.3.7, It is recommended to define this method for any device
599 ----------------
604 There are two options: GPIO-signaled interrupts (Section 5.6.5), and
605 interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
606 new feature in the ACPI 6.1 specification. Either - or both - can be used
608 given SoC. If possible, interrupt-signaled events are recommended.
612 ----------------------
633 performance control on arm64. C-states and P-states may become available at
644 ----------------------------------
648 GetMemoryMap() boot service is the only mechanism that will be used.
652 -------------------------------------
672 -----------------------------------
677 may not even be a non-ARM implementation yet. Hence, they are not currently
682 - Section 9.2: ambient light sensor devices
684 - Section 9.3: battery devices
686 - Section 9.4: lids (e.g., laptop lids)
688 - Section 9.8.2: IDE controllers
690 - Section 9.9: floppy controllers
692 - Section 9.10: GPE block devices
694 - Section 9.15: PC/AT RTC/CMOS devices
696 - Section 9.16: user presence detection devices
698 - Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
700 - Section 9.18: time and alarm devices (see 9.15)
702 - Section 10: power source and power meter devices
704 - Section 11: thermal management
706 - Section 12: embedded controllers interface
708 - Section 13: SMBus interfaces