Lines Matching +full:- +full:section
8 If a section number is used, it refers to a section number in the ACPI
12 outside of the UEFI Forum (see Section 5.2.6 of the specification).
16 - Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
18 - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
20 - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
24 - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
30 BERT Section 18.3 (signature == "BERT")
43 BGRT Section 5.2.22 (signature == "BGRT")
47 Optional, not currently supported, with no real use-case for an
50 CPEP Section 5.2.18 (signature == "CPEP")
55 time as ARM-compatible hardware is available, and the specification
77 DSDT Section 5.2.11.1 (signature == "DSDT")
99 ECDT Section 5.2.16 (signature == "ECDT")
108 EINJ Section 18.6 (signature == "EINJ")
118 ERST Section 18.5 (signature == "ERST")
123 UEFI-based; if it is UEFI-based, this table may be supplied. When this
133 FACS Section 5.2.10 (signature == "FACS")
139 the hardware reduced profile, and only 64-bit address fields will
142 FADT Section 5.2.9 (signature == "FACP")
156 filled in properly - that the PSCI_COMPLIANT flag is set and that
157 PSCI_USE_HVC is set or unset as needed (see table 5-37).
162 FPDT Section 5.2.23 (signature == "FPDT")
168 GTDT Section 5.2.24 (signature == "GTDT")
174 HEST Section 18.3.2 (signature == "HEST")
178 ARM-specific error sources have been defined; please use those or the
207 when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
222 and define processor container devices (_HID ACPI0010, Section 8.4,
225 MADT Section 5.2.12 (signature == "APIC")
230 should be used (types 0xA - 0xF).
234 **Memory-mapped ConFiGuration space**
244 MPST Section 5.2.21 (signature == "MPST")
250 MSCT Section 5.2.19 (signature == "MSCT")
262 NFIT Section 5.2.25 (signature == "NFIT")
277 PCCT Section 14.1 (signature == "PCCT)
284 PMTT Section 5.2.21.12 (signature == "PMTT")
290 PSDT Section 5.2.11.3 (signature == "PSDT")
296 RASF Section 5.2.20 (signature == "RASF")
302 RSDP Section 5.2.5 (signature == "RSD PTR")
308 RSDT Section 5.2.7 (signature == "RSDT")
312 Since this table can only provide 32-bit addresses, it is deprecated
315 SBST Section 5.2.14 (signature == "SBST")
327 SLIT Section 5.2.17 (signature == "SLIT")
345 SRAT Section 5.2.16 (signature == "SRAT")
352 SSDT Section 5.2.11.2 (signature == "SSDT")
425 XSDT Section 5.2.8 (signature == "XSDT")
433 ------------
440 Name Section Usage for ARMv8 Linux
443 on arm64 - there are no assumptions made about
453 default to non-coherent, but be made coherent with
469 of C-states.
531 a device-specific method, the process described for
533 out-of-process use of _OSC is not allowed. That is,
534 submit the device-specific _OSC usage description as
555 _PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
558 _PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
599 ----------------
604 There are two options: GPIO-signaled interrupts (Section 5.6.5), and
605 interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
606 new feature in the ACPI 6.1 specification. Either - or both - can be used
608 given SoC. If possible, interrupt-signaled events are recommended.
612 ----------------------
613 Section 8 of the ACPI specification changed significantly in version 6.0.
617 Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator
618 devices (Section 8.5) to describe processor topology. Section 8.4 of the
633 performance control on arm64. C-states and P-states may become available at
644 ----------------------------------
645 In Section 15 of the ACPI specification, several methods are mentioned as
652 -------------------------------------
672 -----------------------------------
677 may not even be a non-ARM implementation yet. Hence, they are not currently
682 - Section 9.2: ambient light sensor devices
684 - Section 9.3: battery devices
686 - Section 9.4: lids (e.g., laptop lids)
688 - Section 9.8.2: IDE controllers
690 - Section 9.9: floppy controllers
692 - Section 9.10: GPE block devices
694 - Section 9.15: PC/AT RTC/CMOS devices
696 - Section 9.16: user presence detection devices
698 - Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
700 - Section 9.18: time and alarm devices (see 9.15)
702 - Section 10: power source and power meter devices
704 - Section 11: thermal management
706 - Section 12: embedded controllers interface
708 - Section 13: SMBus interfaces
714 Name Section Name Section