Lines Matching full:frequency
15 - https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enha…
88 guaranteed base frequency. Once the user issues a command to use a specific
90 a change in the base frequency dynamically. This feature is called
154 base-frequency(MHz):2600
168 condition is met, then base frequency of 2600 MHz can be maintained. To
183 base-frequency(MHz):2800
191 frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0.
211 This matches the base-frequency (MHz) field value displayed from the
212 "perf-profile info" command for performance level 0(cpufreq frequency is in
215 To check if the average frequency is equal to the base frequency for a 100% busy
224 To verify the base frequency, run turbostat::
261 Which shows that the base frequency now increased from 2600 MHz at performance
269 other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency
270 (Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel
307 configuration allows definitions of parameters, which affects how the frequency
411 clos frequency weight is not specified, default: 0
427 "min" and set the base frequency to always get guaranteed base frequency.
446 clos-max:Max Turbo frequency
456 clos-max:Max Turbo frequency
483 Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency
514 Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF)
517 The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
518 the user control base frequency. If some critical workload threads demand
520 the thread at higher base frequency on specific sets of CPUs (high priority
521 CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs.
556 frequency of guaranteed frequency 2600 MHz.
577 2 of the CPUs are busy and reaching max. frequency (which would be the base
578 frequency as the turbo is disabled). The turbostat output::
598 full guaranteed frequency of 2600 MHz.
613 high-priority-base-frequency(MHz):3000
616 low-priority-base-frequency(MHz):2400
621 offer base frequency of 3000 MHz compared to the standard base frequency at this
660 - Discover Intel(R) SST-BF and note low and high priority base frequency
706 Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
711 configured to get higher turbo frequency by designating them as high priority at
712 the cost of lower or no turbo frequency on the low priority cores.
718 The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
742 frequency properties with Intel(R) SST-TF enabled and compare to the base turbo
762 max-turbo-frequency(MHz):3200
765 max-turbo-frequency(MHz):3100
768 max-turbo-frequency(MHz):3100
771 max-turbo-frequency(MHz):3100
774 max-turbo-frequency(MHz):3100
777 max-turbo-frequency(MHz):3100
780 max-turbo-frequency(MHz):3100
783 max-turbo-frequency(MHz):3100
785 Based on the data above, when all the CPUS are busy, the max. frequency of 3100
815 Based on turbostat output, the performance is limited by frequency cap of 3100
834 high-priority-max-frequency(MHz):3200
835 high-priority-max-avx2-frequency(MHz):3200
836 high-priority-max-avx512-frequency(MHz):3100
839 high-priority-max-frequency(MHz):3100
840 high-priority-max-avx2-frequency(MHz):3000
841 high-priority-max-avx512-frequency(MHz):2900
844 high-priority-max-frequency(MHz):3100
845 high-priority-max-avx2-frequency(MHz):3000
846 high-priority-max-avx512-frequency(MHz):2900
848 low-priority-max-frequency(MHz):2600
849 low-priority-max-avx2-frequency(MHz):2400
850 low-priority-max-avx512-frequency(MHz):2100
854 turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
859 cores will be clipped to a lower frequency of 2600 MHz.
893 - Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency
897 …e desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency