Lines Matching full:description
5 Description: (RW) Enable/disable tracing on this specific trace entiry.
15 Description: (Read) The CPU this tracing entity is associated with.
21 Description: (Read) Indicates the number of PE comparator inputs that are
28 Description: (Read) Indicates the number of address comparator pairs that are
35 Description: (Read) Indicates the number of counters that are available for
42 Description: (Read) Indicates how many external inputs are implemented.
48 Description: (Read) Indicates the number of Context ID comparators that are
55 Description: (Read) Indicates the number of VMID comparators that are available
62 Description: (Read) Indicates the number of sequencer states that are
69 Description: (Read) Indicates the number of resource selection pairs that are
76 Description: (Read) Indicates the number of single-shot comparator controls that
83 Description: (Write) Cancels all configuration on a trace unit and set it back
90 Description: (RW) Controls various modes supported by this ETM, for example
98 Description: (RW) Controls which PE to trace.
104 Description: (RW) Controls the tracing of arbitrary events from bank 0 to 3.
110 Description: (RW) Controls the behavior of the events in bank 0 to 3.
116 Description: (RW) Controls the insertion of global timestamps in the trace
123 Description: (RW) Controls how often trace synchronization requests occur.
129 Description: (RW) Sets the threshold value for cycle counting.
135 Description: (RW) Controls which regions in the memory map are enabled to
142 Description: (RW) Controls instruction trace filtering.
148 Description: (RW) In Secure state, each bit controls whether instruction
155 Description: (RW) In non-secure state, each bit controls whether instruction
162 Description: (RW) Select which address comparator or pair (of comparators) to
169 Description: (RW) Controls what type of comparison the trace unit performs.
175 Description: (RW) Used to setup single address comparator values.
181 Description: (RW) Used to setup address range comparator values.
187 Description: (RW) Select which sequensor.
193 Description: (RW) Use this to set, or read, the sequencer state.
199 Description: (RW) Moves the sequencer state to a specific state.
205 Description: (RW) Moves the sequencer to state 0 when a programmed event
212 Description: (RW) Select which counter unit to work with.
218 Description: (RW) This sets or returns the reload count value of the
225 Description: (RW) This sets or returns the current count value of the
232 Description: (RW) Controls the operation of the selected counter.
238 Description: (RW) Select which resource selection unit to work with.
244 Description: (RW) Controls the selection of the resources in the trace unit.
250 Description: (RW) Select which context ID comparator to work with.
256 Description: (RW) Get/Set the context ID comparator value to trigger on.
262 Description: (RW) Mask for all 8 context ID comparator value
269 Description: (RW) Select which virtual machine ID comparator to work with.
275 Description: (RW) Get/Set the virtual machine ID comparator value to
282 Description: (RW) Mask for all 8 virtual machine ID comparator value
289 Description: (RW) Set the Exception Level matching bits for secure and
296 Description: (RW) Access the start stop control register for PE input
303 Description: (Read) Print the current settings for the selected address
310 Description: (RW) Select the single shot control register to access.
316 Description: (RW) Access the selected single shot control register.
322 Description: (Read) Print the current value of the selected single shot
329 Description: (RW) Access the selected single show PE comparator control
336 Description: (Read) Print the content of the OS Lock Status Register (0x304).
343 Description: (Read) Print the content of the Power Down Control Register
350 Description: (Read) Print the content of the Power Down Status Register
357 Description: (Read) Print the content of the SW Lock Status Register
364 Description: (Read) Print the content of the Authentication Status Register
371 Description: (Read) Print the content of the Device ID Register
378 Description: (Read) Print the content of the Device Type Register
385 Description: (Read) Print the content of the Peripheral ID0 Register
392 Description: (Read) Print the content of the Peripheral ID1 Register
399 Description: (Read) Print the content of the Peripheral ID2 Register
406 Description: (Read) Print the content of the Peripheral ID3 Register
413 Description: (Read) Print the content of the trace configuration register
420 Description: (Read) Print the content of the trace ID register (0x040).
426 Description: (Read) Returns the tracing capabilities of the trace unit (0x1E0).
433 Description: (Read) Returns the tracing capabilities of the trace unit (0x1E4).
440 Description: (Read) Returns the maximum size of the data value, data address,
448 Description: (Read) Returns the value associated with various resources
457 Description: (Read) Returns how many resources the trace unit supports (0x1F0).
464 Description: (Read) Returns how many resources the trace unit supports (0x1F4).
471 Description: (Read) Returns the maximum speculation depth of the instruction
478 Description: (Read) Returns the number of P0 right-hand keys that the trace unit
485 Description: (Read) Returns the number of P1 right-hand keys that the trace unit
492 Description: (Read) Returns the number of special P1 right-hand keys that the
500 Description: (Read) Returns the number of conditional P1 right-hand keys that
508 Description: (Read) Returns the number of special conditional P1 right-hand keys