158 	u32 ret_val;  in e1000_phy_init_script()  local
414 	s32 ret_val;  in e1000_reset_hw()  local
562 	s32 ret_val;  in e1000_init_hw()  local
677 	s32 ret_val;  in e1000_adjust_serdes_amplitude()  local
723 	s32 ret_val;  in e1000_setup_link()  local
841 	s32 ret_val;  in e1000_setup_fiber_serdes_link()  local
976 	s32 ret_val;  in e1000_copper_link_rtl_setup()  local
990 	s32 ret_val;  in gbe_dhg_phy_setup()  local
1038 	s32 ret_val;  in e1000_copper_link_preconfig()  local
1099 	s32 ret_val;  in e1000_copper_link_igp_setup()  local
1240 	s32 ret_val;  in e1000_copper_link_mgp_setup()  local
1348 	s32 ret_val;  in e1000_copper_link_autoneg()  local
1420 	s32 ret_val;  in e1000_copper_link_postconfig()  local
1458 	s32 ret_val;  in e1000_setup_copper_link()  local
1537 	s32 ret_val;  in e1000_phy_setup_autoneg()  local
1687 	s32 ret_val;  in e1000_phy_force_speed_duplex()  local
1947 	s32 ret_val;  in e1000_config_mac_to_phy()  local
2092 	s32 ret_val;  in e1000_config_fc_after_link_up()  local
2310 	s32 ret_val = E1000_SUCCESS;  in e1000_check_for_serdes_link_generic()  local
2424 	s32 ret_val;  in e1000_check_for_link()  local
2600 	s32 ret_val;  in e1000_get_speed_and_duplex()  local
2666 	s32 ret_val;  in e1000_wait_autoneg()  local
2832 	u32 ret_val;  in e1000_read_phy_reg()  local
2967 	u32 ret_val;  in e1000_write_phy_reg()  local
3141 	s32 ret_val;  in e1000_phy_reset()  local
3180 	s32 phy_init_status, ret_val;  in e1000_detect_gig_phy()  local
3255 	s32 ret_val;  in e1000_phy_reset_dsp()  local
3284 	s32 ret_val;  in e1000_phy_igp_get_info()  local
3362 	s32 ret_val;  in e1000_phy_m88_get_info()  local
3435 	s32 ret_val;  in e1000_phy_get_info()  local
3499 	s32 ret_val = E1000_SUCCESS;  in e1000_init_eeprom_params()  local
4560 	s32 ret_val = E1000_SUCCESS;  in e1000_setup_led()  local
4612 	s32 ret_val = E1000_SUCCESS;  in e1000_cleanup_led()  local
5045 	s32 ret_val;  in e1000_get_cable_length()  local
5164 	s32 ret_val;  in e1000_check_polarity()  local
5230 	s32 ret_val;  in e1000_check_downshift()  local
5270 	s32 ret_val;  in e1000_config_dsp_after_link_change()  local
5485 	s32 ret_val;  in e1000_set_phy_mode()  local
5534 	s32 ret_val;  in e1000_set_d3_lplu_state()  local
5635 	s32 ret_val;  in e1000_set_vco_speed()  local
5718 	s32 ret_val;  in e1000_polarity_reversal_workaround()  local