boot/dts/mpc8568mds.dts

12 /include/ "fsl/mpc8568si-pre.dtsi"
38 			#address-cells = <1>;
39 			#size-cells = <1>;
40 			compatible = "cfi-flash";
42 			bank-width = <2>;
43 			device-width = <2>;
47 			#address-cells = <1>;
48 			#size-cells = <1>;
49 			compatible = "fsl,mpc8568mds-bcsr";
53 			bcsr5: gpio-controller@11 {
54 				#gpio-cells = <2>;
55 				compatible = "fsl,mpc8568mds-bcsr-gpio";
57 				gpio-controller;
62 			compatible = "fsl,mpc8568mds-pib";
67 			compatible = "fsl,mpc8568mds-pib";
75 		i2c-sleep-nexus {
86 			tbi-handle = <&tbi0>;
87 			phy-handle = <&phy2>;
91 			phy0: ethernet-phy@7 {
94 				device_type = "ethernet-phy";
96 			phy1: ethernet-phy@1 {
99 				device_type = "ethernet-phy";
101 			phy2: ethernet-phy@2 {
104 				device_type = "ethernet-phy";
106 			phy3: ethernet-phy@3 {
109 				device_type = "ethernet-phy";
111 			tbi0: tbi-phy@11 {
113 				device_type = "tbi-phy";
118 			tbi-handle = <&tbi1>;
119 			phy-handle = <&phy3>;
124 			tbi1: tbi-phy@11 {
126 				device_type = "tbi-phy";
131 			num-ports = <7>;
134 				pio-map = <
162 				pio-map = <
197 		spi@4c0 {
201 		spi@500 {
208 			local-mac-address = [ 00 00 00 00 00 00 ];
209 			rx-clock-name = "none";
210 			tx-clock-name = "clk16";
211 			pio-handle = <&pio1>;
212 			phy-handle = <&phy0>;
213 			phy-connection-type = "rgmii-id";
219 			local-mac-address = [ 00 00 00 00 00 00 ];
220 			rx-clock-name = "none";
221 			tx-clock-name = "clk16";
222 			pio-handle = <&pio2>;
223 			phy-handle = <&phy1>;
224 			phy-connection-type = "rgmii-id";
228 			#address-cells = <1>;
229 			#size-cells = <0>;
231 			compatible = "fsl,ucc-mdio";
234 			 * gianfar's MDIO bus */
235 			qe_phy0: ethernet-phy@07 {
236 				interrupt-parent = <&mpic>;
239 				device_type = "ethernet-phy";
241 			qe_phy1: ethernet-phy@01 {
242 				interrupt-parent = <&mpic>;
245 				device_type = "ethernet-phy";
247 			qe_phy2: ethernet-phy@02 {
248 				interrupt-parent = <&mpic>;
251 				device_type = "ethernet-phy";
253 			qe_phy3: ethernet-phy@03 {
254 				interrupt-parent = <&mpic>;
257 				device_type = "ethernet-phy";
266 		clock-frequency = <66666666>;
267 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
268 		interrupt-map = <
306 		compatible = "gpio-leds";
322 /include/ "fsl/mpc8568si-post.dtsi"