boot/dts/ep405.dts

12 /dts-v1/;
15 	#address-cells = <1>;
16 	#size-cells = <1>;
19 	dcr-parent = <&{/cpus/cpu@0}>;
28 		#address-cells = <1>;
29 		#size-cells = <0>;
35 			clock-frequency = <200000000>; /* Filled in by zImage */
36 			timebase-frequency = <0>; /* Filled in by zImage */
37 			i-cache-line-size = <32>;
38 			d-cache-line-size = <32>;
39 			i-cache-size = <16384>;
40 			d-cache-size = <16384>;
41 			dcr-controller;
42 			dcr-access-method = "native";
51 	UIC0: interrupt-controller {
53 		interrupt-controller;
54 		cell-index = <0>;
55 		dcr-reg = <0x0c0 0x009>;
56 		#address-cells = <0>;
57 		#size-cells = <0>;
58 		#interrupt-cells = <2>;
63 		#address-cells = <1>;
64 		#size-cells = <1>;
66 		clock-frequency = <0>; /* Filled in by zImage */
68 		SDRAM0: memory-controller {
69 			compatible = "ibm,sdram-405gp";
70 			dcr-reg = <0x010 0x002>;
74 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
75 			dcr-reg = <0x180 0x062>;
76 			num-tx-chans = <1>;
77 			num-rx-chans = <1>;
78 			interrupt-parent = <&UIC0>;
88 			compatible = "ibm,opb-405gp", "ibm,opb";
89 			#address-cells = <1>;
90 			#size-cells = <1>;
92 			dcr-reg = <0x0a0 0x005>;
93 			clock-frequency = <0>; /* Filled in by zImage */
99 				virtual-reg = <0xef600300>;
100 				clock-frequency = <0>; /* Filled in by zImage */
101 				current-speed = <9600>;
102 				interrupt-parent = <&UIC0>;
110 				virtual-reg = <0xef600400>;
111 				clock-frequency = <0>; /* Filled in by zImage */
112 				current-speed = <9600>;
113 				interrupt-parent = <&UIC0>;
118 				compatible = "ibm,iic-405gp", "ibm,iic";
120 				interrupt-parent = <&UIC0>;
124 			GPIO: gpio@ef600700 {  label
125 				compatible = "ibm,gpio-405gp";
130 				linux,network-index = <0x0>;
132 				compatible = "ibm,emac-405gp", "ibm,emac";
133 				interrupt-parent = <&UIC0>;
137 				local-mac-address = [000000000000]; /* Filled in by zImage */
139 				mal-device = <&MAL>;
140 				mal-tx-channel = <0>;
141 				mal-rx-channel = <0>;
142 				cell-index = <0>;
143 				max-frame-size = <1500>;
144 				rx-fifo-size = <4096>;
145 				tx-fifo-size = <2048>;
146 				phy-mode = "rmii";
147 				phy-map = <0x00000000>;
153 			compatible = "ibm,ebc-405gp", "ibm,ebc";
154 			dcr-reg = <0x012 0x002>;
155 			#address-cells = <2>;
156 			#size-cells = <1>;
163 			clock-frequency = <0>; /* Filled in by zImage */
173 				compatible = "ep405-bcsr";
175 				interrupt-controller;
177 				irq-routing = [	00	/* SYSERR */
181 						02	/* NB PCIIRQ mux ? */
198 			#interrupt-cells = <1>;
199 			#size-cells = <2>;
200 			#address-cells = <3>;
201 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
216 			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
219 			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
220 			interrupt-map = <
228 		linux,stdout-path = "/plb/opb/serial@ef600300";