include/plat/mux.h

2  * arch/arm/plat-omap/include/mach/mux.h
7  * Copyright (C) 2004 - 2008 Texas Instruments Inc.
8  * Copyright (C) 2003 - 2008 Nokia Corporation
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28  *	 - W8	     = ball
29  *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
30  *	 - MMC2_DAT0 = function
37 #define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
101  * OMAP730/850 has a slightly different config for the pin mux.
102  * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
104  * - for pull-up/down, only has one enable bit which is is in the same register
105  *   as mux config
199 	UART3_BCLK,	/* 12MHz clock out */
236 	/* OMAP-1510 GPIO */
241 	/* OMAP1610 GPIO */
245 	/* OMAP-1710 GPIO */
281 	/* OMAP-1610 MMC2 */
293 	/* OMAP-1610 External Trace Interface */
301 	/* OMAP16XX GPIO */
316 	/* OMAP-1610 uWire */
324 	/* OMAP-1610 SPI */
335 	/* OMAP-1610 Flash */
347 	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
352 	/* OMAP-1610 USB0 alternate pin configuration */
378 	/* I2C OMAP-1610 */