sound/oss/README.OSS

197   for instructions about configuring and compiling kernel. File Readme.cards
198   contains card specific instructions for configuring this driver for
223 Readme.cards for info about configuring the driver with your card. Also
229 Configuring version 3.8 (for Linux) with some common sound cards
232 This document describes configuring sound cards with the freeware version of
241 you can use the information included in soundon.log when configuring OSS/Free.
249 		When configuring the sound driver, you should carefully
334 Configuring PnP cards
338 soft configuring their I/O, IRQ, DMA and shared memory resources.
390 support in the driver. Detailed instructions for configuring these cards
575 	NOTE! You will have to use the "old" config script when configuring
636 	work fully in Linux. You can get audio features working by configuring
698 Configuring sound driver (with Linux)
725 After configuring the kernel and sound driver and compile the kernel
826 	  Note! The MSS driver permits configuring two DMA channels. This is a
885 This section gives additional instructions about configuring some cards.
987 Configuring GUS is simple. Just enable the GUS support and GUS MAX or
1036 Configuring these cards is obvious (or it should be). With MSS
1058 enable these options when configuring the driver. The configuration
1070 the file when configuring the driver. The easiest way is to mount the DOS
1082 Configuring ATP is little bit tricky since it uses so many I/O, IRQ and
1095 when configuring the driver.
1177 You need to enable just the MAD16 /Mozart support when configuring
1203 can be enabled by configuring the card to use two DMA channels. Possible
1215 when configuring the driver. The configuration program asks later if you
1223 specific section for instructions about configuring more than one MPU401 cards.
1323 configuring Linux. Having it enabled is likely to cause mysterious problems