Lines Matching full:this

1 	This file contains notes for users of PSS sound cards who wish to use the 
2 newly added features of the newest version of this driver.
4 	The major enhancements present in this new revision of this driver is the 
11 	This parameter is basically a flag.  A 0 will leave the joystick port 
13 setting is pss_enable_joystick=0 as this keeps this driver fully compatible 
14 with systems that were using previous versions of this driver.  If you wish to 
22 	This parameter takes a port address as its parameter.  Any available port 
29 builtin Wearnes CDROM port.  If this is the case with your PSS sound card you 
33 setting of this parameter leaves the CDROM port disabled to maintain full 
34 compatibility with systems using previous versions of this driver.
37 of the user.  These options are only available if this driver is loaded as a 
42 	This module parameter is a flag that can be used to tell the driver to 
44 value will only attept to configure the CDROM and joystick ports.  This 
46 and/or CDROM port(s) of his PSS sound card.  If this driver is loaded with this 
48 this driver with the following command "rmmod pss && rmmod ad1848 && rmmod 
51 by the sound drivers.  This default setting of this parameter is 0 to retain 
52 full behavioral compatibility with previous versions of this driver.
56 	This parameter can be used to specify whether you want the driver to reset 
57 all emulations whenever its unloaded.  This can be useful for those who are 
58 sharing resources (io ports, IRQ's, DMA's) between different ISA cards.  This 
59 flag can also be useful in that future versions of this driver may reset all 
61 specifying it now will ensure that all future versions of this driver will 
62 continue to work as expected.  The default value of this parameter is 1 to 
63 retain full behavioral compatibility with previous versions of this driver.
67 	This parameter can be used to specify the file containing the firmware 
70 default setting of this parameter is "/etc/sound/pss_synth" as this was the 
71 path and filename the hardcoded value in the previous versions of this driver.
86 …48 && /sbin/rmmod mpu401 && /sbin/rmmod sound && /sbin/rmmod soundcore  # This line not needed, bu…