Lines Matching +full:activate +full:- +full:to +full:- +full:activate

2 ------
10 -------------
13 You have to configure the sound card (Sound Blaster or Microsoft Sound System)
14 and, if you want it, the Roland MPU-401 (do not use the Sound Blaster MPU-401,
15 SB-MPU401) in the main driver menu. Activate the lowlevel drivers then select
16 the Audio Excel hardware that you want to initialize. Check the IRQ/DMA/MIRQ
19 I you own a Gallant's audio card based on SC-6600, activate the SC-6600 support.
20 If you want to change the configuration of the sound board, be sure to
21 check off all the configuration items before re-configure it.
24 -----------------
25 To use this driver as a module, you must configure some module parameters, to
38 mss_base	I/O base address for activate MSS mode (default SBPRO)
40 mpu_base	I/O base address for activate MPU-401 mode
42 mpu_irq		MPU-401 irq line (5, 7, 9, 10 or 0)
53 Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly
57 install ad1848 /sbin/modprobe aedsp16 && /sbin/modprobe -i ad1848
58 install opl3 /sbin/modprobe aedsp16 && /sbin/modprobe -i opl3
61 sound -> aedsp16 -> [ ad1848, opl3 ]
67 ---------------------
68 This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
69 It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
72 For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
73 activating the audio card with the MS-DOS device driver, then you have to
74 <ctrl>-<alt>-<del> and boot Linux.
81 3) Boot MS-DOS and configure the audio card with the boot time device
83 4) <ctrl>-<alt>-<del> and boot Linux. This will maintain the DOS configuration
88 -------------------------
92 > To: riccardo@cdc8g5.cdc.polimi.it (Riccardo Facchetti)
95 > Just to let you know got my Audio Excel (emulating a MSS) working