Lines Matching full:should

7 driver.  It is not complete, any questions you have should be directed to
75 	this function should return TIOCSER_TEMT, otherwise return 0.
76 	If the port does not support this operation, then it should
92 	If the appropriate bit is set, the signal should be driven
93 	active.  If the bit is clear, the signal should be driven
102 	of the outputs should not be returned, since the core keeps
103 	track of their state.  The state information should include:
109 	the port does not support CTS, DCD or DSR, the driver should
111 	not available, the signal should not be indicated as active.
122 	The driver should stop transmitting characters as soon as
148 	interrupts should be disabled when the shutdown method is
157 	nonzero, the break signal should be transmitted.  The signal
158 	should be terminated when another call is made with a zero
167 	state.  Enable the port for reception.  It should not activate
177 	effect, and free any interrupt resources.  It should not disable
249 	This function should not be used to grab any resources.
275 	If any fail, no resources should be registered when this function
276 	returns, and it should return -EBUSY on failure.
285 	port->type should be set to the type found, or PORT_UNKNOWN if
289 	which should be probed using standard kernel autoprobing techniques.
356 	Locking: port->lock should be held.
363 	drv->port should be NULL, and the per-port structures should be