Lines Matching full:using

49 Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP
50 provides L2TPv3 IP encapsulation (no UDP) and is implemented using a
55 indirectly by pppd using a pppol2tp socket. In the case of ethernet,
69 pseudowire. These interfaces can be managed using standard Linux tools
73 can be added to a bridge using brctl. All L2TP datapath protocol
120 Userspace may control behavior of the tunnel or session using
137 to retrieve tunnel and session statistics from the kernel using the
144 1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel
145    using netlink.
149 3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE
153 4. Create a new L2TP session in the tunnel using a
158 tunnels. Configuration and status info may be set or read using netlink.
165 using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink
213 and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the
318 increased using sock_hold(). This ensures that the kernel socket