Lines Matching full:duty
143 attribute that needs to be set to the maximum attainable RPM (fan at 100% duty-
155 manual mode, the fan speed is set by writing the duty-cycle value to the
157 current duty-cycle as set by the fan controller in the chip. All PWM outputs
168 duty-cycles: full, low, and min. Full is internally hard-wired to 255 (100%)
174 pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%)
175 pwm[1-3]_auto_point1_pwm low-speed duty-cycle
176 pwm[1-3]_auto_pwm_min min-speed duty-cycle
183 The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm
186 auto_point1_temp_hyst value, the output duty-cycle is set to the auto_pwm_min
189 duty-cycle. If any of the temperatures rise above the auto_point3_temp value,
190 all PWM outputs are set to 100% duty-cycle.
192 Following is another representation of how the chip sets the output duty-cycle
195 Duty-Cycle Duty-Cycle
200 < linearly adjusted duty-cycle >
257 to full-speed (100% duty-cycle).
268 fan[5-6]_max RW Max attainable RPM at 100% duty-cycle.
272 pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported
288 fast the PWM duty-cycle will change
292 (default is 0, which means the duty-
302 pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty-
306 low-speed duty-cycle.
308 full-speed duty-cycle which is hard-
309 wired to 255 (100% duty-cycle).