Lines Matching +full:select +full:- +full:gpios

8 - compatible : "gpio-control-nand"
9 - reg : should specify localbus chip select and size used for the chip.  The
12 - #address-cells, #size-cells : Must be present if the device has sub-nodes
14 - gpios : specifies the gpio pins to control the NAND device.  nwp is an
18 - bank-width : Width (in bytes) of the device.  If not present, the width
20 - chip-delay : chip dependent delay for transferring data from array to
22 - gpio-control-nand,io-sync-reg : A 64-bit physical address for a read
30 gpio-nand@1,0 {
31 	compatible = "gpio-control-nand";
33 	#address-cells = <1>;
34 	#size-cells = <1>;
35 	gpios = <&banka 1 0	/* rdy */